Operation Manual

EDIT-MAP/OUT
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Chapter 5 EDIT Mode 131
Expand & Velocity Range
[EDIT] Button → [F2] Button → Knob 1 to select
"EDIT-Exp&Vel"
Use Expand page to create a more expansive sound for the
sample. This feature makes it possible to broaden the sound
of monaural samples, and to generate wider acoustics for your
stereo samples.
Use Velocity Range page to set the sample’s velocity range,
and velocity crossfade.
Knob 1
[ Turn] Cursor/Page
Positions the cursor and selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Expand Detune
This feature sets up a tuning differential (discord)
between left and right channels.
[Range] -7 — +7
• Positive values apply the differential in one direction,
while negative values apply it in the other. A setting
of 0 switches detuning off.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 3
[ Turn] Expand Dephase
This feature sets up a differential in the playback start
address for each channel — resulting in a subtle phase
discord.
[Range] -63 — +63
• Positive values apply the differential in one direction,
while negative values apply it in the other. A setting
of 0 switches dephasing off.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] Expand Width
This parameter sets the sound’s width.
[Range] -63 — +63
• Negative settings reverse the stereo image.
• A setting of +63 produces normal positioning for ste-
reo samples.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 1
Same function as Cursor q (page 131).
Knob 2
[ Turn] Velocity Low Crossfade
Determines how the sound fades at velocities below the
Velocity Low Range setting. The higher the value the
more abrupt the fade.
[Range] 0 — 127
• The higher the value, the lower the velocity at which
the sample will sound.
• The use of velocity crossfade allows you to blend
samples that are set for playback at different velocity
ranges, so that sound does not change drastically in
response to slight velocity changes near the range
limit.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 3
[ Turn] Velocity Low Range
Turn the knob to set the minimum velocity required to pro-
duce sound from this sample.
[Range] 0 — Velocity High Range
[ Press] MIDI
When this knob is pressed the parameter can be directly
set by a MIDI note-on message received from an external
MIDI device.
Cursor q (Expand)
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor/Page
Expand
Detune
Expand
Dephase
Expand Width —
Press
action
Tree View QUICK... QUICK... QUICK... —
q
Cursor
Cursor w (Velocity Range)
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor/Page
Velocity Low
Crossfade
Velocity Low
Range
Velocity High
Range
Velocity High
Crossfade
Press
action
Tree View QUICK... MIDI MIDI QUICK...
w
Cursor