Operation Manual

EDIT-LFO
144 Chapter 5 EDIT Mode • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Knob 5
[ Turn] LFO Key On Sync
This setting selects whether LFO oscillation always
begins from the same phase (at the same point in the
LFO waveform).
If you set the value to on, LFO oscillation will restart from
phase 0 (the leftmost point in the preceding illustration)
with each new note that you play.
[Range] off, on
Knob 1
Same function as Cursor q (page 143).
Knob 3
[ Turn] Cutoff Mod Depth (Cutoff Modulation Depth)
This value sets the degree by which the amplitude is
modulated by the LFO waveform. Higher values produce
stronger modulation.
[Range] 0 — 127
• This parameter has no effect if the EDIT-FILTER-
Fltr&EQ Filter Type is set to “bypass” (page 133).
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] Pitch Mod Depth (Pitch Modulation Depth)
Determines the depth of pitch modulation to be applied
by the LFO. Higher values produce deeper modulation.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 5
[ Turn] Amp Mod Depth (Amplitude Modulation Depth)
Determines the depth of amplitude modulation to be
applied by the LFO. Higher values produce deeper modu-
lation.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 1
Same function as Cursor q (page 143).
Knob 3
[ Turn] Cutoff Mod Phase Invert
(Cutoff Modulation Phase Invert)
Determines whether the phase of the LFO will be inverted
or not.
When “on” the phase of the LFO is inverted so that the
“direction” of modulation is reversed.
[Range] off, on
Knob 4
[ Turn] Pitch Mod Phase Invert
(Pitch Modulation Phase Invert)
Determines whether the phase of the LFO will be inverted
or not.
When “on” the phase of the LFO is inverted so that the
“direction” of modulation is reversed.
[Range] off, on
Cursor w
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor/Page —
Cutoff Mod
Depth
Pitch Mod
Depth
Amp Mod
Depth
Press
action
Tree View — QUICK... QUICK... QUICK...
w
Cursor
Cursor e
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor/Page —
Cutoff Mod
Phase Invert
Pitch Mod
Phase Invert
—
Press
action
Tree View ————
e
Cursor