Operation Manual

RECORDING-TRIGGER
158 Chapter 6 RECORD Mode • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3. TRIGGER
You use this page to set the type of triggers used to start and
stop actual recording.
Press the [REC] button and then the [F3] button to enter the
TRIGGER function display.
1 display page is provided: Trigger.
Trigger
[REC]Buttonl → [F3]Button to select "REC-Trigger"
You use this page to set the type of triggers used to start and
stop actual recording.
Knob 1
[ Turn] Cursor
Positions the cursor.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Press] MONITOR
Pressing this knob alternately turns the MONITOR func-
tion on and off. A speaker icon appears above Knob 2
when the MONITOR function is turned on.
Knob 3
[ Turn] AD Input Gain
Selects line or microphone-level sensitivity for the analog
input jacks.
[Range] Line, Mic
• If the front-panel REC VOL control is set to maximum
(minimum) and the record level as displayed by the
level meters is too low (high), set the AD Input Gain
parameter to Mic (Line) for optimum level matching.
[DISPLAY]
q Input level meter.
w Start and stop edge level settings.
Knob 1, 2
Same function as Cursor q (page 158).
Knob 3
[ Turn] Start Trigger
Specifies the method to be used to start recording from
the record standby display.
[Range] Manual, Edge/Manual
• Manual ... Recording can only be started by press-
ing Knob 4 (>START).
• Edge/Manual ... Recording will start automatically
when the input signal level exceeds the speci-
fied start edge level (Knob 4). Recording can
also be started manually by pressing Knob 4
(>START) in the record standby display.
Knob 4
[ Turn] Start Edge Level
Specifies the input level at which recording will be auto-
matically started.
Recording will start automaticall the instant the input sig-
nal level exceeds the Start Edge Level in the record
standby display (but only if the Start Trigger parameter
(Knob 3) is set to Edge/Manual).
[Range] 0 — 63
[ Press] QUICK...
Calls the quick entry menu (page 83).
Cursor q
q
qw
Cursor
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor — AD Input Gain — —
Press
action
Tree View MONITOR — — —
Cursor w
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor — Start Trigger
Start Edge
Level
—
Press
action
Tree View MONITOR — QUICK... —
w
Cursor
Chapter 6
RECORD Mode