Operation Manual

7. DISK COMMANDS
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Chapter 7 DISK Mode 181
COPY VOLUME
[DISK] Button → [COMMAND/EXIT] Button →
Knob 1 to highlight display line 1 → Press Knob 4
Copies all data in a selected volume to a separate volume.
Floppy disk volumes cannot be selected as the copy source or
destination. Also, volumes on disks which were not formatted
by the A5000/A4000 cannot be copied.
[Operation]
1. Use Knob 3 to specify the Copy Type.
2. Use Knob 1 (EXEC) or Knob 5 (EXEC&CONT) to initiate execu-
tion. When the confirmation display appears, press Knob 5 (YES)
to execute the copy operation.
• If Knob 1 (EXEC) is used to execute the command, the command
menu will be recalled after execution has finished. If Knob 5
(EXEC&CONT) is used to execute the command, the copy volume
display will be retained so you can continue and copy other vol-
umes.
Knob 1
[ Turn] Cursor
Positions the cursor.
[ Press] EXEC (Execute)
Press this knob to call the copy volume confirmation dis-
play. Press Knob 5 (YES) to actually execute the copy
volume operation.
Knob 3
[ Turn] Copy Type
Specifies whether one volume is to be copied, or all vol-
umes on the selected disk.
[Range] OneVolume, AllVolume
• OneVolume … Only the single specified volume is
copied. Any previous data in the destination
volume will be erased and overwritten by the
copied data.
• AllVolume … All volumes on the selected disk will
be copied. Any previous data on the destina-
tion disk will be erased and overwritten by the
copied data.
Knob 5
[ Press] EXEC&CONT (Execute & Continue)
Press this knob to call the copy volume confirmation dis-
play. Press Knob 5 (YES) to actually execute the copy
volume operation.
Knob 1
Same function as Cursor q (page 181).
Knob 3
[ Turn] To Disk
Selects the destination hard disk, ZIP disk, or similar
medium to which the data is to be copied.
[Range] All connected/mounted disks.
Knob 5
[ Turn] To Volume
Selects the destination volume to which the data is to be
copied.
[Range] A volumes on the disk specified by the To Disk
parameter.
• This parameter cannot be set when the AllVolume
Copy Type is selected.
[ Press] EXEC&CONT (Execute & Continue)
Press this knob to call the copy volume confirmation dis-
play. Press Knob 5 (YES) to actually execute the copy
volume operation.
Cursor q
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor — Copy Type — —
Press
action
EXEC — — — EXEC&CONT
q
Cursor
Cursor w
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor — To Disk — To Volume
Press
action
EXEC — — — EXEC&CONT
w
Cursor