Operation Manual

About the COMMANDS
228 Chapter 9 COMMAND • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
EXPORT
[COMMAND/EXIT] Button → Knob 1 to highlight display line 4
→ Press Knob 4
Coverts the selected sample to AIFF or WAV format (audio
wave data formats commonly used on personal computers)
and saves the result to an MS-DOS format floppy disk or hard
disk.
If a sample bank is selected all samples contained in that sam-
ple bank are converted and saved.
After conversion an ".AIF" suffix is appended to AIFF format
files, and a ".WAV" suffix is appended to WAV format files.
• Large samples cannot be exported to multiple floppy disks.
• Most playback settings will be lost when samples are exported.
Thus if an exported sample is re-imported the original sample set-
ting may not be reproduced as expected.
• Stereo samples are exported in a stereo file format.
[Operation]
1. Select the Export Type.
2. Select the sample to be exported.
3. Select the destination disk and/or directory.
4. Press Knob 1 (EXEC) or Knob 5 (EXEC&CONT), and the export
confirmation display will appear. Press Knob 5 (YES) to execute
the export operation.
• If Knob 1 (EXEC) is used to execute the command, the display pre-
vious to the command menu will be recalled after execution has fin-
ished. If Knob 5 (EXEC&CONT) is used to execute the command,
the export display will be retained so you can continue and perform
further export operations.
Knob 1
[ Turn] Cursor
Positions the cursor.
[ Press] EXEC
Press this knob to call the export confirmation display.
Press Knob 5 (YES) to actually execute the export opera-
tion.
Knob 3
[ Turn] Export Type
Speficies the format of the exported file.
[Range] AIFF, WAV
• AIFF ... A single specified sample is exported as
an AIFF file.
• WAV ... A single specified sample is exported as a
WAV file.
[ Press] UP
Press this knob to move upward from the current disk
directory to the next highest directory.
• Pressing the UP knob will have no effect if the top
(root) directory on the disk is selected.
Knob 4
[ Turn] File/Directory
Selects the file or directory from the list on the right side
of the display to which the data will be exported.
[Range] All files and directories in the current directory.
• If a directory is selected from the list the exported
data will be saved to that directory.
• If a file is selected from the list the data will be saved
to the current directory (the directory shown in the
lower left corner of the display)
[ Press] DOWN
Opens the selected directory in the list. The name of the
newly opened directory will appear on the left side of the
display, and the files and directories it contains will be
listed on the right side of the display.
• This command cannot be executed when a file is
selected from the list.
Knob 5
[ Press] EXEC&CONT
Press this knob to call the export confirmation display.
Press Knob 5 (YES) to actually execute the export opera-
tion.
Knob 1
Same function as Cursor q (page 228).
Cursor q
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor — Export Type File/Directory —
Press
action
EXEC — UP DOWN EXEC&CONT
q
Cursor
Cursor w
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor — Sample File/Directory —
Press
action
EXEC — UP DOWN EXEC&CONT
w
Cursor