Operation Manual

Specifications
254 Appendix • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Specifications
Tone generation method AWM2 tone generator
Maximum Polyphony 126 notes (64 notes on the A4000), 32 multi-timbre parts (16 parts on the A4000).
A/D conversion 20 bit 64-times oversampling
D/A conversion 24 bit 8-times oversampling
Digital I/O (only when AIEB1 I/O expansion board is installed)
Input/output DIGITAL connectors S/P-DIF (coaxial)
OPTICAL connectors S/P-DIF (optical)
Input frequency 48 kHz, 44.1 kHz, 32 kHz
Output frequency 44.1 kHz
Sampling frequency Analog input 44.1, 22.05, 11.025 kHz, 5.5125 kHz (mono and stereo)
Digital input (only when AIEB1 I/O expansion board is installed)
48 kHz, 44.1 kHz, 32 kHz external synchronized recording
(stereo only)
1/2, 1/4 and 1/8 undersampling is supported
Internal sample memory capacity Standard 4 Mbytes (installed on-board)
Maximum 128 Mbytes
(When four 32 Mbyte 72 pin SIMM modules are installed. The
on-board 4 Mbytes are unused only if memory has been
expanded to the maximum.)
Sampling time Maximum sample length 32 Mbytes monaural
64 Mbytes stereo
Maximum sampling time (mono or stereo)
6 minutes 20 seconds (44.1 kHz)
12 minutes 40 seconds (22.05 kHz)
25 minutes 21 seconds (11.025 kHz)
50 minutes 43 seconds (5.5125 kHz)
Effects 6 effect blocks (3 on the A4000)
Total equalizer (4 bands)
Sample equalizer
Program 128 program
Sequencer Real-time recording and playback
Front panel POWER switch
INPUT L,R jacks (phone x 2)
REC VOLUME (L& R shared)
MASTER VOLUME (L&R shared, STEREO OUT & PHONES shared)
PHONES OUTPUT jack
Knobs (1 — 5)
Mode buttons (PLAY, EDIT, REC, DISK, UTILITY)
Function buttons (six buttons)
COMMAND/EXIT button
ASSIGNABLE button