Operation Manual

Effect Parameter List
264 Appendix • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
53: PHASER1
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.0Hz — 39.70Hz Frequency of phase modulation
3 LFO Depth 0 — 127 Depth of phase modulation
4 Phase Shift Offset 0 — 127 Phase shift offset value
5 Feedback Level -63 — +63 Level at which phaser output will be returned to the input (negative values invert the phase)
6 Stage 4, 5, 6, 7, 8, 9, 10, 11, 12 Number of phaser shifter stages
7 Diffusion mono/stereo Diffusion
8 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
9 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
54: PHASER2
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.0Hz — 39.70Hz Frequency of phase modulation
3 LFO Depth 0 — 127 Depth of phase modulation
4 Phase Shift Offset 0 — 127 Phase shift offset value
5 Feedback Level -63 — +63 Level at which phaser output will be returned to the input (negative values invert the phase)
6 Stage 3, 4, 5, 6 Number of phaser shifter stages
7 LFOPhaseDifference -180deg — +180deg L/R phase difference in the modulation waveform (no difference at 0 deg)
8 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
9 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
55: TREMOLO
1 LFO Frequency 0.0Hz — 39.70Hz Modulation frequency
2 AM Depth 0 — 127 Amplitude modulation depth
3 PM Depth 0 — 127 Delay modulation depth
4 LFOPhaseDifference -180deg — +180deg L/R phase difference of the modulation waveform (no difference at 0 deg)
5 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
6 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
7 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
9 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
12 Input Mode mono/stereo Mono/stereo selection for the input
56: FLANGING PAN
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and the effect sound
2 Flanger&Pan Speed 0.0Hz — 39.70Hz Delay modulation frequency
3 Flanger Depth 0 — 127 Delay modulation depth
4 Flanger Delay 0.1 — 180.0ms Delay time
5 Flanger Feedback -63 — +63 Feedback amount
6 FlgPan Delay 0.1 — 180.0ms Delay time
7 FlgPan Feedback -63 — +63 Feedback amount
8 HPF Frequency thru,22Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
9 LPF Frequency 1.0kHz — 18.0kHz,thru Frequency at which the low pass filter will cut the high range
10 Delay Time 0.1 — 270.0ms Delay time
11 Delay Feedback -63 — +63 Feedback amount
12 Delay Level 0 — 127 Delay level
13 AM Speed 0.0Hz — 39.70Hz Frequency of amplitude modulation
@14 AM Wave tri,sine,saw up,saw down Select amplitude modulation waveform
15 AM Depth 0 — 127 Amplitude modulation depth
@16 AM Inverse R normal,inverse Invert left/right phase of amplitude modulation signal
57: FLOW PAN
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance between delay sound and effect sound
2 Delay Time 0.1 — 650ms Delay time
3 Delay Time Ofst R 0 — -884 Offset of R ch delay time
4 Feedback Level -63 — +63 Feedback amount
5 FB Level Ofst R -63 — +63 Offset of R ch feedback
6 Feedback High Damp 0.1 — 1.0 Adjust the high range attenuation (lower values will cause the high range to decay faster)
7 FB Hi Damp Ofst R -0.9 — +0.9 Offset of R ch high damp
8 Delay Mod Speed 0.0Hz — 39.70Hz Delay modulation frequency
9 Delay Mod Depth 0 — 127 Delay modulation depth
10 Delay Dry/Wet 1 — 127 Balance between delay sound and effect sound
11 PreDelayPan Speed 0.0Hz — 39.70Hz Frequency of the pre-delay autopan
12 PreDelayPan Wave tri,sine Waveform of the pre-delay autopan
13 PreDelayPan Depth 0 — 127 Depth of the pre-delay autopan
14 Auto Pan Speed 0.0Hz — 39.70Hz Autopan frequency
15 Auto Pan Wave tri,sine Autopan waveform selection
16 Auto Pan Depth 0 — 127 Autopan depth
58: ROTARY SPEAKER
1 LFO Frequency 0.0Hz — 39.70Hz Rotation frequency of the speaker
2 LFO Depth 0 — 127 Depth of modulation produced by speaker rotation
3 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
4 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
5 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
6 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
7 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
8 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
9 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
10 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound