Operation Manual

Effect Parameter List
266 Appendix • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
67: AUTO PAN
1 LFO Frequency 0.0Hz — 39.70Hz Auto pan frequency
2 L/R Depth 0 — 127 Left/right depth of panning
3 F/R Depth 0 — 127 Front/rear depth of panning
4 PAN Direction L<>R, L>>R, L<<R, Lturn, Rturn, L/R Auto pan type (L<->R is sine wave, L/R is square wave)
5 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
6 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
7 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
9 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
68: DELAY + AUTO PAN
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time 0.1 — 740.0ms Delay time
3 Feedback Level -63 — +63 Amount of feedback
4 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
5 Auto Pan Speed 0.0Hz — 39.70Hz Auto pan frequency
6 Auto Pan Depth 0 — 127 Panning depth
7 EQ Frequency 90Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
9 EQ Width 1.0 — 12.0 Width of the mid range area which the EQ will boost/cut
69: DELAY L,C,R
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time L 0.1ms — 1480.0ms Length of left channel delay
3 Delay Time R 0.1ms — 1480.0ms Length of right channel delay
4 Delay Time C 0.1ms — 1480.0ms Length of center channel delay
5 Feedback Time 0.1ms — 1480.0ms Length of feedback delay
6 Feedback Level -63 — +63 Feedback amount
7 Delay Level C 0 — 127 Volume of center channel
8 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
9 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
10 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
11 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
12 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
70: DELAY L,R
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time L 0.1ms — 1480.0ms Length of left channel delay
3 Delay Time R 0.1ms — 1480.0ms Length of right channel delay
4 Feedback Time 1 0.1ms — 1480.0ms Length of feedback delay 1
5 Feedback Time 2 0.1ms — 1480.0ms Length of feedback delay 2
6 Feedback Level -63 — +63 Amount of feedback
7 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
8 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
9 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
71: ECHO
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time L1 0.1ms — 740.0ms Length of first delay of left channel
3 Feedback Level L -63 — +63 Amount of feedback for left channel
4 Delay Time R1 0.1ms — 740.0ms Length of first delay of right channel
5 Feedback Level R -63 — +63 Amount of feedback for right channel
6 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
7 Delay Time L2 0.1ms — 740.0ms Length of second delay of left channel
8 Delay Time R2 0.1ms — 740.0ms Length of second delay of right channel
9 Delay Level 2 0 — 127 Volume of second delay
10 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
11 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
12 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
13 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
72: CROSS DELAY
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Delay Time L>R 0.1ms — 740.0ms Delay time from left (input) to right (output)
3 Delay Time R>L 0.1ms — 740.0ms Delay time from right (input) to left (output)
4 Feedback Level -63 — +63 Amount of feedback
5 Input Select L, R, L&R Input select
6 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
7 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
8 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
9 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
10 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
73: CONTROL DELAY(MONO)
1 Delay Time 0.1ms — 1480.0ms Delay time
2 Feedback Level -63 — +63 Amount of feedback
3 Feedback High Damp 0.1 — 1.0 High range attenuation (lower values cause the high range to decay faster)
4 Delay transition rate 1 — 48 Selects the speed of delay time variation
5 Control Type Normal, Scratch Normal or scratch type setting
6 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
7 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
8 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
9 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
10 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound