Operation Manual

PLAY-PROGRAM
90 Chapter 4 PLAY Mode • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
e MIDI → SAMPLE
If MIDI → SAMPLE is set to "Upper" or "Lower" in the tree view dis-
play page, the corresponding icon will appear: for Upper,
and for Lower.
■ Program Mode = Multi
Knob 1
Same function as Program Mode = Single (pege 89).
Knob 2
[ Turn] Part
Selects the program part to be edited.
[Range] A01 — A16, B01 — B16 (01 — 16 on the A4000)
Knob 3
[ Turn] Program
Turn the knob to select a program for playback, editing, or
save.
[Range] 001 — 128
[ Press] RENAME...
If you wish to set or change the program's name, push
this knob to proceed to the name editing screen. For
information about how to edit name strings, see "Charac-
ter Entry" (page 81).
Knob 4, 5
Same function as Program Mode = Single (pege 89).
• When Program Mode = "Multi", the MIDI channels
set for each part number take priority over the MIDI
channels set for individual samples or sample banks.
• A program selected with a part which is assigned to
the basic channel becomes the "Master Program,"
and all effect, setup, and control settings made for
the Master Program will affect the entire Multi setup.
Program Mix
[PLAY] Button → [F1] Button → Knob 1 to select
"PLAY-PgmMix"
The Program Mix page allows the final output levels and
transpose values for each program to be set as required.
The content of this display will depend on the Program Mode
setting (page 89).
■ Program Mode = Single
Knob 1
[ Turn] Page
Selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Program (Select Program)
Turn the knob to select a program for playback, editing, or
save.
[Range] 001 — 128
Knob 3
[ Turn] Program (Select Program)
Same function as Knob 2.
[ Press] RENAME...
If you wish to set or change the program's name, press
this knob to proceed to the name editing screen. For
information about how to edit name strings, see "Charac-
ter Entry" (page 81).
Knob 4
[ Turn] Program Level
Turn the knob to set the program's overall output level.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Page Part Program
Program
Mode
Basic Receive
Channel
Press
action
Tree View — RENAME... — MIDI
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Page Program Program Program Level
Program
Transpose
Press
action
Tree View — RENAME... QUICK... QUICK...