Specifications

EDIT-EG
142 Chapter 5 EDIT Mode • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] PEG Level Velocity Sensitivity
This value sets the velocity sensitivity for the PEG levels:
the amount by these levels (initial, attack, sustain, and
release rates) vary in response to the velocity of the
played note.
Set the value to 0 to keep the levels the same for all
velocities. Positive settings cause the levels to increase
as velocity increases, while negative settings cause the
levels to decrease as velocity increases.
[Range] -63 — +63
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 5
[ Turn] PEG Range
This value sets the range for PEG pitch variation, in semi-
tones.
This setting works in conjunction with the level settings at
the Pitch EG Level page (page 141) to determine how far
the PEG levels are from the sample’s basic pitch. If you
set the PEG Level settings to maximum (+127 or -127),
then the distance between each level and the basic pitch
will be equal to the number of semitones that you set
here.
[Range] -63 — +63
[ Press] QUICK...
Calls the quick entry menu (page 83).