Specifications

EDIT-MIDI/CTRL
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Chapter 5 EDIT Mode 147
Knob 1
[ Turn] Cursor Position/Page Selection
Positions the cursor to select a controller and selects dis-
play pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Device
Specifies the external MIDI controller from which control
change messages will be received, or the internal Pro-
gram LFO.
[Range] 000 — 120, AfterTouch, PitchBend, NoteNumber,
Velocity, ProgramLFO, KeyOnRandom
• 000 — 120 ... Specifies a MIDI control change
number for sample control.
• AfterTouch ... Keyboard aftertouch response will
be used for sample control.
• PitchBend ... Pitch bend data whill be used for
sample control.
• NoteNumber ... Note-on message note-on num-
bers will be used for sample control.
• Velocity ... Note-on message velocity data wil be
used for sample control.
• ProgramLFO ... Control/sample change data cre-
ated by the internal Program LFO is used for
sample control.
• KeyOnRandom ... A random control value is
generated each time a note-on message is
received.
• When a standard MIDI controller, such as "001/Mod-
Whel (modulation wheel) is selected, the standard
controller assignment wil also be displayed.
• It is recommended that you do not use controller
numbers 000 and 032, as many MIDI devices use
these numbers for bank selection purposes.
[ Press] MIDI
When this knob is pressed the parameter can be directly
set by a MIDI note-on message received from an external
MIDI device.
Knob 3
[ Turn] Function
Specifies the sample function to be controlled from an
external MIDI controller or the Program LFO.
[Range]
Function Control Target Page
----- —
Start Address Start address 120
Level Level 132
Pan Bias Pan bias 127
Pitch Bias Pitch control
Portamento Rate/Time Portamento rate/time 130
Cutoff Bias Cutoff bias 134
Cutoff Distance Cutoff distance 134
Filter Q/Width Filter Q/width 134
Filter Gain Filter gain 134
AEG Attack Rate AEG attack rate 137
AEG Decay Rate AEG decay rate 137
AEG Sustain Level AEG sustain level 137
AEG Release Rate AEG release rate 137
FEG Attack Rate FEG attack rate 139
FEG Decay Rate FEG decay rate 139
FEG Release Rate FEG release rate 139
FEG Init Level FEG init level 139
FEG Sustain Level FEG sustain level 139
FEG All Level FEG all level
PEG Attack Rate PEG attack rate 140
PEG Decay Rate PEG decay rate 141
PEG Release Rate PEG release rate 141
PEG Init Level PEG init level 141
PEG Sustain Level PEG sustain level 141
LFO Speed LFO speed 143
LFO Delay LFO delay 143
Cutoff Mod Depth Cutoff modulation depth 144
Pitch Mod Depth Pitch modulation depth 144
Amp Mod Depth Amplitude modulation depth 144
Pitch Bend Pitch bend 145
Control1 Range Control 1 range 148
Control2 Range Control 2 range 148
Control3 Range Control 3 range 148
Control4 Range Control 4 range 148
Control5 Range Control 5 range 148
Control6 Range Control 6 range 148
[ Press] Function List
Calls a list of the available functions.