Specifications

RECORDING-SETUP
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A5000/A4000 • Chapter 6 RECORD Mode 155
Knob 4
No function.
Knob 5
[ Turn] Map Key
When the Key Map parameter is set to Auto, this parame-
ter determines whether new samples will be mapped to
only the white keys or to all keys.
[Range] white, all
Knob 1
Same function as Cursor q (page 153).
Knob 2
[ Turn] Input
This setting selects the input source for the recording.
Note that the DIGITAL and OPTICAL settings are effec-
tive only if you have installed the optional I/O expansion
board (AIEB1 board).
[Range] AD L, AD L/R, StOut, DIGITAL, OPTICAL
• AD L ... Record analog signal from the front panel’s
INPUT-L jack.
• AD L/R ... Record analog signal from both front-
panel input jacks (INPUT-L and INPUT-R).
• StOut ... Record the signal that the A5000/A4000
is producing and transmitting to its own stereo
outputs. (A process called resampling: the
A5000/A4000 re-records its own signal. You
use this setting to record playback that you
control from a MIDI keyboard or other such
device.)
• DIGITAL ... Record the digital signal supplied to
the DIGITAL IN connector on the AIEB1
expansion board.
• OPTICAL ... Record the digital signal supplied to
the OPTICAL IN connector on the AIEB1
expansion board.
• When StOut, DIGITAL, or OPTICAL is selected the
Record Effect on/off parameter (REC-EFFECT-
EfType, page 160) will automatically be turned off
(record effects cannot be used).
• When DIGITAL or OPTICAL is selected, the Stereo/
Mono parameter (Knob 3) will automatically be set to
Stereo.
• If you select STOut, then MIDI control-change mes-
sages (as well as pitchbend and aftertouch mes-
sages) are all disabled during recording. In addition,
maximum polyphony (the maximum number of mon-
aural samples that can play at one time) is limited to
4 (so that you cannot record sound from more than 4
monaural or 2 stereo samples at any given moment).
[ Press] MONITOR
Pressing this knob alternately turns the MONITOR func-
tion on and off. A speaker icon appears above Knob 2
when the MONITOR function is turned on.
Knob 3
[ Turn] Stereo/Mono
Determines whether new samples will be recorded as
stereo or mono samples.
[Range] Mono, Stereo
• Mono ... New samples will be recorded as mono
samples.
When AD L is selected a signal connected to
the AD L input will be recorded as a mono
sample.
When AD R or StOut is selected, or when
recording the stereo output from a record
effect, the L and R channel signals will be
mixed and recorded as a mono sample.
• Stereo ... New samples will be recorded as stereo
samples.
When AD L is selected a signal connected to
the AD L input will be recorded on both the L
and R channels as a stereo sample (the same
signal will be recorded on the L and R chan-
nels).
When AD R or StOut is selected, or when
recording the stereo output from a record
effect, the L and R channel signals will be
recorded as a stereo sample.
When the DIGITAL or OPTICAL input is
selected this parameter will be automatically
set to Stereo (Mono cannot be selected).
Knob 4
[ Turn] Frequency
This setting selects the sampling frequency the A5000/
A4000 uses to record the input.
[Range] If Input is set to AD L, AD L/R, or StOut:
44.1k(44.1kHz), 22k(22.05kHz), 22kLoFi,
11k(11.025kHz), 11kLoFi, 5k(5.5125kHz), 5kLoFi
When Key Map (Knob 2) Is Set To Auto
Cursor e
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor/Page Input
Stereo /
Mono
Frequency Pre Trigger
Press
action
Tree View MONITOR ———
e
Cursor