User Manual

(1)
44
480
(5)
362
3543
ACD1
GENERAL SPECIFICATIONS
Scene memory 50 scenes per amplifier
Number of
amplifiers that can
be connected
Via the DATA PORT
connector
Up to 32 units
EVia the MONITOR/
REMOTE connector
Up to 8 units
Display 16characters x 2 lines backlit LCD
Power requirements AC100V, 50Hz/60Hz
Power consumption 15W
Dimensions (W x H x D) 480 x 44 x 362mm (18.7" x 1.75" x 14.2"), 1U
Weight 4.0kg (8.8lbs)
AC Cable Length 2.5m
DIMENSIONS
unit : mm
CONTROL I/O SPECIFICATIONS
Terminal Format Level Connector
MONITOR/REMOTE — — D-SUB 15P (Female) x 8*
1
DATA PORT (RS-485) RS-485 RS-485 RJ-45*
4
GPI
IN — 0-5V
EUROBLOCK*
2
(3.5mm pitch)
OUT — Open Collector
+V — 5V
FAULT OUTPUT*
3
— —
NETWORK IEEE 802.3 10Base-T/100Base-TX RJ-45
*1 XP7000, XP5000, XP3500, XP2500, XP1000, XM4180, XM4080, XH200
*2 Inputs: 4channels, Outputs: 4channels
Inputs: Not apply 2 wire Fader mode
Outputs: Withstanding Voltage Vmax = 12V (OFF)
Outputs: Sink Current Imax = 75mA/pin, Imax = 300mA/4pins (ON)
+V: Imax = 100mA/2pins
COM=CLOSE,COM=OPEN
*3 Input: Imax = 1A, Vmax = 30VDC
*4 T5n, T4n, T3n, PC9501N, PC6501N, PC4801N, PC3301N, PC2001N, PC9500N, PC4800N,
PC3300N