User Manual

Chapter 10 Component editor (TXn only)

Amp Editor Owner’s Manual

174

 Crossover

Here you can apply a high-pass filter and low-pass filter to the signal, so that only a specific frequency region is

allowed to pass.

Parameter Range Function

q Typ e

Thru

6dB/Oct

12dB/Oct AdjustGc

12dB/Oct Butrwrth

12dB/Oct Bessel

12dB/Oct Linkwitz

18dB/Oct AdjustGc

18dB/Oct Butrwrth

18dB/Oct Bessel

24dB/Oct AdjustGc

24dB/Oct Butrwrth

24dB/Oct Bessel

24dB/Oct Linkwitz

36dB/Oct AdjustGc

36dB/Oct Butrwrth

36dB/Oct Bessel

48dB/Oct AdjustGc

48dB/Oct Butrwrth

48dB/Oct Bessel

48dB/Oct Linkwitz

For each HPF/LPF, this selects the attenuation per octave

and the filter type.

If you select [Thru], the filter will not be applied.

w Frequency 20Hz–20kHz Specifies the cutoff frequency for each HPF/LPF.

e Gc -6dB–+6dB

Specifies the gain at the cutoff frequency when [Type] is

set to [AdjustGc] (Adjustable Gc).

w ew e