User Manual

Chapter 4 Basic operations in Amp Editor
Amp Editor Owner’s Manual
29
 Editing an amplifier’s Speaker Processor component settings
(TXn only)
For each channel of the amplifier, you can edit the settings (the parameter set) of the Speaker Processor compo-
nent for the speaker you’re using.
14. Click the [SP] icon of the channel whose Speaker Processor component settings you
want to edit.
The “Speaker Processor” dialog box will open.
15. Click the [RECALL] button to select the library item for the speaker you’re using.
The parameter set for the Speaker Processor component will be switched.
• If you want to use a library file created in DME Designer (file name extension “.cel”), use the
“Speaker Processor Library Converter” (page 101) to convert it to a library item file for TXn.
• If the library is created with an extension, the file name extension “.ce2” indicates “without secu-
rity” and “.cep” means “with security.”
16. Click the [X] button located in the upper right of the dialog box to close it.
17. Repeat steps 14 through 16 to change the Speaker Processor component library item for
each channel of each amp.
NOTE