User's Manual

RM-CG ReferenceManual
19
Alert log list
Display Description What to do
important mic CH* broken Important mic CH* broken. Please contact your Yamaha dealer.
Dante hardware error Dante has not started up correctly. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize the memory.
Should this also fails, contact your Yamaha
dealer.
Firmware update failed, because
of *
Failure of firmware update has occurred. Check firmware file on the firmware update
pages of Web GUI.
Firmware update failed, because
of internal error
Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please contact your Yamaha
dealer.
Web UI internal failure Internal failure has occurred in Web GUI. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize settings.
Should this also fails, contact your Yamaha
dealer.
failed to start audio proc The device audio has not started up correctly. Turn the power off, then turn on after waiting at
least six seconds. If this does not solve the
problem, please initialize the memory. Should
this also fails, contact your Yamaha dealer.
System error The device has not started up correctly.
Power unstable The device is not supplying power normally. Connect to a PoE+ compatible switch. If this
does not solve the problem, please turn the
power off, then turn on after waiting at least six
seconds. Should this also fail, contact your
Yamaha dealer.
Syslog setting error Failed to update syslog transfer servers. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize settings.
logging error Failed to restart logging.
Automatic audio tuning failed,
because of internal error.
Automatic audio tuning has failed, because
internal error has occurred.
Turn the power off, then turn the power on after
waiting at least six seconds. Please try again. If
this does not solve the problem, contact your
Yamaha dealer.
Dante started in fail safe mode Dante has started in failsafe mode. Execute Failsafe Recovery using Audinate’s
firmware update tool.
Unable to configure Dante,
because the Dante device is
locked.
Dante is currently limited to control settings,
because the device is locked.
Unlock device lock using Dante Controller or
check Dante Domain Manager settings.
Resume data lost The settings saved in internal memory has been
lost.
Initialize the memory. If this dose not solve the
problem, contact your Yamaha dealer.
Saving setting data failed The device has not started up correctly. Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize the memory.
Contact your Yamaha dealer if problem still
exists.
CPU temperature too high CPU temperature has been too high. Turn the power off, let the CPU cool down. Turn
the power on again. If the temperature is still too
high, check the installation environment and
whether dirt or a foreign object could have
clogged the cooling fan, and clean the fan if
necessary.