User's Manual

RM-CG ReferenceManual

Use the Web GUI “RM-CG Device Manager” to check/change the settings of this unit.

IMPORTANT: Check/change the settings after the installation of this unit is completed. For details on installing this unit, refer to the

RM-CG Installation Manual.

Starting RM-CG Device Manager

Prepare the following.

• Computer

• LAN cable

1. Connect the computer to the network switch (where this unit is connected) with a LAN cable.

2. Download the application “RM Device Finder” from the Yamaha website (U.S.A. and Canada: https://

uc.yamaha.com/support/, Other countries: https://download.yamaha.com/), and then start it.

3. Select a network in the [Select Network Interface Card] window, and then click [OK].

4. Select this unit in the [Detected Device] window, and then click [Browse].

The first login window of RM-CG Device Manager appears.

WEB GUI