Owner's Manual

11
! PLAYBACK MODE Button/[PB MODE] Knob
ONCE: Move to KEY 2 and finish.
GO&REV: Move to KEY 2. After stopping there for the Timecode amount set for the END KEY DELTA, go back to the
START KEY. After moving to the START KEY, this repeats the operation of going KEY 1 → KEY 2 and returning, just as
was done at the start.
LOOP: Move from KEY 2 to the START KEY, and loop from there.
@ TRANSPORT BAR
RTZ: Return automation object (sound source or listener) to the start position.
STOP: Turn OFF Automation.
PLAY: Start Automation.
SMOOTH [ON] Button/[SMOOTH] Knob
An ON/OFF switch for switching between sharp angles for the path and smooth angles.
Tur ning this ON smooths the angles.
TC TRG [ON] Button
An ON/OFF switch that sets whether automation starts automatically when the START KEY Timecode is satisfied.
# [JOYSTICK] Knob
Settings related to JOYSTICK on the console.
SRC: Moves the sound source.
LIS: Moves the listener.
OFF: Turns OFF JOYSTICK.