Owner's Manual

2
Installing the Vintage Stomp Package
See the “ADD-ON EFFECTS Installation Guide” for information about the installation method for Vintage Stomp Package.
Max100
Using Max100
As with other effects, you can recall and edit the Max100 program on the console or in Studio Manager.
The basic operation is as follows:
1 Select one of the internal effects processors.
2 Patch the signal to and from the currently selected effects processor.
3 Locate the Effects Library page.
4 Select and recall Max100.
n When you recall the program, all effects processor outputs will be muted temporarily.
5 Locate the Effects Edit page.
6 Set the parameters. (See the “Part Names and Functions” on page 3 for more information on Max100 parameters.)
The procedure for recalling and editing Max100 varies depending on the console you are using.
Refer to the Owner’s Manual that came with your console for more information.
Editing Parameters in Studio Manager
In Studio Manager, editable parameters appear in both the Max100 window and the Generic Editor window.
The Max100 window enables you to edit Max100 specific parameters, and the Generic Editor window enables you to edit
parameters common to Max100 and other Effects.
Refer to the Studio Manager Owner’s Manual for your console for more information on the Generic Editor window.
Studio Manager Generic Editor window