Owner's Manual

3
Part Names and Functions
1 MODE
Switches the sound quality (tone).
There are four types available, each with differences in modulation amplitude and in the amount of feedback.
2 SPEED
Adjusts the rate of modulation.
3 FOOT SW
The foot switch acts as a bypass.
It turns the effect ON or OFF.
4 MIX BALANCE
Sets the balance between the direct sound and the effect sound.
Although this parameter is shared by the various effects in the console, a setting of 100 percent is recommended when
using Max100.
1
3
4
1
2
2
Studio Manager Max100 window Console display