Owner's Manual

6
Vintage Phaser
Using Vintage Phaser
As with other effects, you can recall and edit the Vintage Phaser program on the console or in Studio Manager.
The basic operation is as follows:
1 Select one of the internal effects processors.
2 Patch the signal to and from the currently selected effects processor.
3 Locate the Effects Library page.
4 Select and recall Vintage Phaser.
n When you recall the program, all effects processor outputs will be muted temporarily.
5 Locate the Effects Edit page.
6 Set the parameters. (See the “Part Names and Functions” on page 7 for more information on Vintage Phaser parameters.)
The procedure for recalling and editing Vintage Phaser varies depending on the console you are using.
Refer to the Owner's Manual that came with your console for more information.
Editing Parameters in Studio Manager
In Studio Manager, editable parameters appear in both the Vintage Phaser window and the Generic Editor window.
The Vintage Phaser window enables you to edit Vintage Phaser specific parameters, and the Generic Editor window enables
you to edit parameters common to Vintage Phaser and other Effects.
Refer to the Studio Manager Owner's Manual for your console for more information on the Generic Editor window.
Studio Manager Generic Editor window