User Manual
Table Of Contents
- Contents
- Introduction
- Component names and functions
- Getting ready to use this product
- Using this product for livestreaming (17LIVE, Twitch, YouTube Live)
- Using this product in a Web meeting
- Using this product for a podcast
- Using this product for recording
- Using this product in music production
- Troubleshooting
- Appendix
Audio-related and other issues
Your Windows PC does not recognize this product
(
Have you installed the driver?
(
You must install the Yamaha Steinberg USB Driver if you wish to connect this product to a Windows PC.
See the following website for how to install the Yamaha Steinberg USB Driver.
AG03MK2:
https://www.yamaha.com/2/ag03mk2/
AG06MK2:
https://www.yamaha.com/2/ag06mk2/
No sound is heard
(
Are you using the appropriate settings for the [STREAMING OUT] selector switchD?
(
Referring to the names and functions of each component, set the [STREAMING OUT] selector switch as
appropriate for your use case.
(
Are any external devices (such as a mic) or powered monitor speakers connected correctly?
(
Are the connecting cables shorted out or otherwise disconnected?
(
Have you turned on the power of any connected electronic instruments or powered monitor
speakers?
(
Is the [GAIN] knob m, the level knob t, the fader s (AG03MK2 only), the speaker [S] knob F and
the headphone [H] knob G adjusted appropriately?
(
Is the [LINE] switch f, [GAIN HIGH LOW] switch k (AG03MK2 only) and the [HIGH LOW] switch l
(AG06MK2 only) set to on (O)?
(
Turn these switches off (N). If the volume from the sound source is too low, you may not be able to
hear the sound when these switches are set to on (O).
(
Is the [MIX MINUS] E switch turned on (O)?
(
If you are using Internet livestreaming software, have you adjusted the volume in the software?
Sound is distorted or noisy
(
Is the channel [PEAK] LED r on?
(
Try lowering the [GAIN] knob and turning the [PAD] switch on (O).
(
Are the [PEAK] indicators on the level meters C lit up red?
(
Adjust the level knobs for each channel. The [PEAK] indicator on the level meter will not go dark even if
you lower the levels of the speaker [S] knob or headphone [H] knob.
(
Are the levels set too high on the devices connected to this product?
(
Lower the volume of the connected devices.
(
Is the [LINE] switch f, [GAIN HIGH LOW] switch k (AG03MK2 only) and the [HIGH LOW] switch l
(AG06MK2) set to off (N)?
(
Turn these switches on (O). If the volume from the sound source is too high, the sound may distort
when these switches are set to off (N).
65
Troubleshooting > Audio-related and other issues