User Manual

Component names and functions
Rear panel
b a b a
a
[U] USB 2.0 jack (USB-C)
Connect your computer or iPhone/iPad here. When connecting a computer, power will be supplied from the
computer to this unit. When connecting an iPhone/iPad, connect a USB power adapter (sold separately) to the b [5V
DC] USB port.
NOTE
A dedicated driver is required to use this product with Windows® computers. Download and install the driver from the
following website.
AG03MK2 :
https://www.yamaha.com/2/ag03mk2/
AG06MK2 :
https://www.yamaha.com/2/ag06mk2/
NOTICE
(
Do not connect any other devices except for an iPhone, iPad or a computer to the USB 2.0 port.
(
A 5 V and 1 A power supply is required to operate this product on bus power. If a stable power supply cannot be
provided, supply power from the separately available [5V DC IN] USB port.
Points of caution when using the USB port
Observe the following points to prevent loss of data when connecting the USB port to other devices.
(
Make sure to use the USB cable packaged with this product.
(
Observe the following before inserting or unplugging the USB cable.
(
Quit all applications.
(
Make sure that no data is being transmitted from this product.
(
After you unplug the cable, make sure to wait for at least six seconds before plugging the cable in again. Rapidly
plugging in and unplugging the cable may cause a malfunction.
9
Component names and functions > Rear panel