User Manual

5 Configure the settings for the AG
Make the settings for each switch on the front panel as follows.
(
Phantom [+48V] switch: on (when using a condenser mic)
(
Channel 1 [GAIN] knob, level knob, fader: as appropriate (see illustration)
(
[STREAMING OUT]: [INPUT MIX]
(
[MIX MINUS]: off
6 Configure the settings for the app
Launch the app you’ll use to hold the Web meeting, open the device settings in the app and
confirm that the sound input device and sound output device are both set to either [Yamaha
AG03MK2] or [Yamaha AG06MK2].
7 Adjust the headphone/earphone volume
Adjust the volume using the headphone [H] knob while speaking into the mic. Adjusting the
volume using the headphone [H] knob has no effect on the volume of the livestreaming
audio.
8 Start the Web meeting.
Use the fader (only on the AG03K2) or the level knob to adjust the respective volumes.
Launch the livestreaming app and check the balance for the listeners.
57
Using this product in a Web meeting > Using this product with your computer