User Manual
Table Of Contents
- Contents
- Introduction
- Component names and functions
- Getting ready to use this product
- Using this product for livestreaming (17LIVE, Twitch, YouTube Live)
- Using the ducker function
- Using the maximizer function
- Using the sound pad
- Using the voice changer
- Using the presets
- Using the dedicated app
- Using this product for a podcast
- Using this product in music production
- Troubleshooting
- Appendix
Component names and functions
Rear panel
Bottom part of rear panel
a b c d
a
[12V] DC jack
Connect the included AC adapter here.
b
[POWER SOURCE] selector switch
Selects which jack is used to power this product. Set this to the [USB 2.0] side when powering this product via the
[USB 2.0] port, and set this to the [12V] DC jack side when powering this product via the [12V] DC jack.
c
[USB 2.0] jack (Type C)
Connect your computer or iPad/iPhone. When connecting a computer, power will be supplied from the computer to
this unit. When connecting an iPad/iPhone, connect the included AC adapter separately to the [12V] DC jack.
NOTE
A dedicated driver is required to use this product with a computer. Download and install the driver from the following website.
(
https://www.yamaha.com/2/ag08/
NOTICE
(
Do not connect any other devices to the USB 2.0 port except for a computer, iPad or iPhone.
(
A 5 V and 1.5 A power supply is required to operate this product on bus power. If a sufficient amount of power is not available
for a stable power supply, supply power separately via the [12V] DC jack.
11
Component names and functions > Rear panel