User Manual
Table Of Contents
- Contents
- Introduction
- Component names and functions
- Getting ready to use this product
- Using this product for livestreaming (17LIVE, Twitch, YouTube Live)
- Using the ducker function
- Using the maximizer function
- Using the sound pad
- Using the voice changer
- Using the presets
- Using the dedicated app
- Using this product for a podcast
- Using this product in music production
- Troubleshooting
- Appendix
WARNING
(
Adjust the volume before you toggle these switches. This is because the levels may suddenly get loud depending on the device
you’ve connected, which could damage your hearing or cause external devices to malfunction.
g
[SIG/PEAK] LED
Use these indicators to check the input signal levels. To send audio at an appropriate volume to your computer,
adjust the levels for each channel so that the green LEDs light up but the red LEDs only briefly light up when a loud
sound is input.
h
[STREAMING ON/OFF] switch
These switches toggle the output to the livestream bus (STREAMING bus) of channels 3/4, 5/6 and 7/8.
Fader section
a
b
a
Channel faders
Adjusts the output level of the audio input from channels 1–8.
b
(m) (s) Mute buttons
Toggles the mute feature on (the LED lights up red) or off (the LED goes dark). You can use this to silence the sound
when you take a short break or in similar situations while livestreaming.
NOTE
The LEDs flash when you are muting a channel using the INPUT MUTE function with a foot switch.
18
Component names and functions > Front side