User Manual
Table Of Contents
- Contents
- Introduction
- Component names and functions
- Getting ready to use this product
- Using this product for livestreaming (17LIVE, Twitch, YouTube Live)
- Using the ducker function
- Using the maximizer function
- Using the sound pad
- Using the voice changer
- Using the presets
- Using the dedicated app
- Using this product for a podcast
- Using this product in music production
- Troubleshooting
- Appendix
Effects section
a
e
f
i
c d
b
g
h
a
[COMP EQ] buttons
Toggles the compressor and equalizer on/off for channels 1/2. This is set at the optimal setting for livestreaming by
default. This keeps down unnecessary noise in the low end and helps smooth out differences in the input levels.
b
[VOICE CHANGER] button
Toggles the voice changer function for channel 1 on/off.
c
[PITCH] knob
Turn this knob to adjust the pitch for the channel 1 voice. You can change the pitch within a range of one octave up or
down.
When the parameter value is at zero, only the center LED lights up.
d
[FORMANT] knob
Turn this knob to adjust the formant for the channel 1 voice. Turn this towards LOW for a more masculine voice, and
turn this towards HIGH for a more feminine voice.
e
[FX] buttons
Toggles the send on/off to FX 1 from channel 1 and to FX 2 from channel 2.
NOTE
The LEDs flash when you have turned the send off by using the INPUT MUTE function with a foot switch.
f
FX TYPE ([REVERB]/[DELAY]/[DLY→REV]) LEDs
Use these indicators to check the FX effect type for channel 1.
When REVERB is selected, the REVERB indicator lights up; when DELAY is selected, the DELAY indicator lights up; and
when DLY→REV (DELAY→REVERB) is selected, both indicators light up.
19
Component names and functions > Front side