User Manual
Table Of Contents
- Contents
- Introduction
- Component names and functions
- Getting ready to use this product
- Using this product for livestreaming (17LIVE, Twitch, YouTube Live)
- Using the ducker function
- Using the maximizer function
- Using the sound pad
- Using the voice changer
- Using the presets
- Using the dedicated app
- Using this product for a podcast
- Using this product in music production
- Troubleshooting
- Appendix
Recording to the sound pad
NOTE
The available recording time is five seconds.
1 Press the [REC] button.
The product enters REC STANDBY mode.
To exit REC STANDBY mode, press the [SHIFT] button and the [REC] button at the same time.
2 Use the [SOUND PAD] [1]–[6] buttons to select the pad to which you will record.
NOTE
When you long-press a pad to select it, you can check the contents of that sound pad while the button is pressed.
3 To start recording, press the REC button again.
Recording starts. When you press the [SHIFT] and [REC] buttons at the same time, the
recorded data is saved in this unit, and the unit exits REC STANDBY mode. If you don’t want to
save the data, press the [SHIFT] button and the [SOUND PAD] button of the record destination
at the same time. Doing so erases the recorded data and returns the unit to REC STANDBY
mode.
58
Using the sound pad > Recording to the sound pad