Specifications

ManualsBrandsYamaha ManualsComputer HardwareAI8

PM1D System Software Update Guide

Special Notices

• The software and this Update Guide are the exclusive

copyrights of Yamaha Corporation.

• The Software License Agreement for this software is included

at the end of this guide. Be sure to read the agreement

carefully before installing the software.

• Copying of the software or reproduction of this Update Guide

in whole or in part by any means is expressly forbidden

without the written consent of the manufacturer.

• Yamaha makes no representations or warranties with regard

to the use of the software and documentation and cannot be

held responsible for the results of the use of this Update Guide

and the software.

• The screen displays as illustrated in this Update Guide are for

instructional purposes, and may appear somewhat different

from the screens which appear on your computer.

• Visit the following Yamaha website for information about

future updates of application and system software and any

changes in specifications and functions.

http://www.yamahaproaudio.com/

• Specifications and descriptions in this Update Guide are for

information purposes only. Yamaha Corp. reserves the right

to change or modify specifications at any time without prior

notice. Since specifications may not be the same in every

locale, please check with your Yamaha dealer.

• The company names and product names in this Update Guide

are the trademarks or registered trademarks of their respective

companies.

Contents

Before you use the PM1D system ....................... 1

System Requirements.......................................... 1

System update procedure ................................... 2

1. Updating the firmware

(CS1D/DSP1D(-EX)/AI8/AO8/DIO8)................... 2

2. Updating the CS1D screen software....................... 4

3. Initializing the memory........................................... 4

About the version checking function.................. 5

ATTENTION

SOFTWARE LICENSE AGREEMENT ...................... 6

PM1D system contains software that allows the CS1D/DSP1D(-

EX)/AI8/AO8/DIO8 (subsequently referred to as “the

components”) to operate independently. Thus, all software must

be updated to the same version to ensure consistency. If you fail

to perform this step, the CS1D’s version checking function will

detect the inconsistency, and the system will not start up

correctly.

Once you have updated the entire system to the same version,

subsequent updates are not necessary. However if you add a new

unit or update, you must once again update the entire system.

The following system is required in order to perform the update.

• An IBM PC/AT compatible computer with a Pentium II

233 MHz processor and 64 MB of memory or better.

(Pentium II 350 MHz and 128 MB of memory is

recommended.)

• Windows 95 (OSR2 or later), Windows 98 (including Second

Edition), Windows Me, Windows NT 4.0 (Service Pack 6a or

later), Windows 2000, or Windows XP Home Edition/

Professional

• Display capability of 800 x 600 pixels (SVGA, High Color) or

better

Before you use the PM1D

system

•

After updating the system, you must execute

INITIALIZE ALL MEMORIES. If you fail to perform the

initialization, operation is not guaranteed.

System Requirements

NOTE:

•

Depending on your hardware or OS, system requirements may be

greater than listed above.

•

If you are using a notebook computer, system requirements may

be greater than listed above as the minimum. Also,

communication may become unstable due to the power

management settings in the Windows Control Panel, or due to

power management settings specific to notebook CPUs (e.g.,

SpeedStep (Intel Corporation), PowerNow! (AMD Corporation),

or LongRun (Transmeta Corporation)). Please disable these

power management settings and use your computer with its power

supply adaptor connected.

Summary of content (8 pages)

PAGE 1
PM1D System Software Update Guide Special Notices • The software and this Update Guide are the exclusive copyrights of Yamaha Corporation. • The Software License Agreement for this software is included at the end of this guide. Be sure to read the agreement carefully before installing the software. • Copying of the software or reproduction of this Update Guide in whole or in part by any means is expressly forbidden without the written consent of the manufacturer.
PAGE 2
• • • • • 10 MB or more free hard disk space Mouse Serial port RS-232C cable (cross-connected) One ATA-compliant PCMCIA Type II PC Flash Storage card (subsequently referred to as “memory card”) • A device with a PCMCIA Type II card slot (A system that enables you to copy downloaded files to the memory card) Main screen 3 7 8 5 4 9 6 J System update procedure When updating the system, you must perform the update and installation for all components.
PAGE 3
1-2 Before you perform the update, you must exit all [Using PM1DLOAD] 1-1 Depending on the target that is being updated, the firmware is sent over the following routes from the computer (PC). Connect an RS-232C cable (cross connected) or a D-Sub half-pitch 68pin cable to provide the appropriate route, and turn on the power. • CS1D update other software and memory-resident programs.
PAGE 4
2. Updating the CS1D screen software 3. Initializing the memory To update the CS1D screen software, you will use one memory card, and copy the downloaded file via the memory card into the CS1D. Before you perform this procedure, you must complete the firmware update described in the preceding section. Be sure to initialize the memory after you update the firmware and CS1D screen software. 2-1 You will need to provide a commercially-available 3-2 Turn on the power to the PW1D.
PAGE 5
About the version checking function The CS1D screen software contains a function that checks whether the software of all components is a valid combination of versions. If there is a combination of different versions, or if any component has malfunctioned, the VERSION CHECK popup window will appear when the CS1D starts up. This will not appear if all components are correct. This version check function is explained below.
PAGE 6
CONSOLE section INPUT01-12 not OK INPUT block (CS1D lower left) inoperable INPUT13-24 not OK INPUT block (CS1D upper left) inoperable INPUT25-36 not OK INPUT block (CS1D lower right) inoperable INPUT37-48 not OK INPUT block (CS1D upper right) inoperable INSEL not OK SELECTED INPUT CHANNEL block inoperable MAS1 not OK MIX OUTPUT / DCA GROUP block inoperable MAS2 not OK MIX OUTPUT / DCA GROUP block inoperable OUTSEL not OK SELECTED OUTPUT CHANNEL block, SCENE MEMORY block, MASTER block, LCD FUN
PAGE 7
ATTENTION SOFTWARE LICENSE AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”). BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE.
PAGE 8
Yamaha Manual Library http://www.yamaha.co.jp/manual/ Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/ U.R.G.