Operation Manual

Connecting to a Network
DANTE ACCELERATOR Operation Manual 8
Dante Audio Data over Wireless Networks
Wireless Ethernet networks should not be used to carry Dante
audio data, and Dante Controller installed on a PC or Mac will
not allow selection of Wireless Ethernet interface or any other
non-standard wired Ethernet interface.
You should NOT install any wireless components in your
Dante network.
Example wireless configuration (unsupported)
Use of 100Mbps Network interface
The use of 100 Mbps Ethernet device with the Dante
Accelerator is NOT SUPPORTED. You must connect the
Dante Accelerator to Gigabit interfaces:
• Gigabit Ethernet network switch
• Gigabit network interface on a PC or Mac
Dante
Accelerator
Ethernet network adapter