Owner's Manual

Chapter 7 Detail View window
Amp Editor Owner’s Manual
125
t Redundant Mode (TXn only)
Indicates the amplifier’s input redundant mode (Redundant Backup/Override/Off). To change the mode, use
the Device Properties window [General] tab.
y Amp Mode (TXn/Tn/PC-N/XP/XM only)
Indicates the amplifier’s output mode (Stereo/Parallel/Bridge). To change the mode, use the Device Properties
window [General] tab (page 128).
u Amp Gain/Sensitivity (TXn only)
Indicates each channel’s gain and input sensitivity values. To change the settings, use the Device Properties
window [General] tab.
i [Device Properties] button
When you click this, the Device Properties window will appear (page 127).