Owner's Manual

Chapter 10 Component editor (TXn only)
Amp Editor Owner’s Manual
157
 Parameter link support list
 : Available
— : Not available
* Linking is possible only between channels A/B by using the [LINK] button in the Detail View window; this cannot be added to a
local parameter link group.
• Parameters or components cannot belong to multiple link groups.
• Use the Signal Path View window to create component link groups or add components to groups (page
141).
• Local link for attenuators is not included in parameter link; it can be specified in the Detail View window
(page 120).
• For a Speaker Processor component, the parameters of a recalled library item whose security level was
set to View or Hide cannot be assigned to parameter link. Component link can be specified for these
parameters.
• If you want to also make Global link settings for a Local-linked parameter or component, do not specify
Global link for multiple components or parameters within the same local link. Doing so may cause unex-
pected behavior.
Global link (Absolute link only) Local link
Component link Parameter link Component link Parameter link
Attenuation —  — *
Output Mute —  ——
Speaker Processor
8Band EQ
 —

(Absolute link only)
—
4 x 4 Matrix Mixer
Polarity
Input Delay
Oscillator

Other ————
NOTE