Owner's Manual

Chapter 5 Main panel window
Amp Editor Owner’s Manual
54
 “Recall Safe” dialog box (TXn only)
In the “Scene Manager” dialog box, click the [Recall Safe] button to access the “Recall Safe” dialog box. For
each amplifier, you can specify the components that you want to be unaffected by a scene recall. Click the [OK]
button to apply the modified settings and close the dialog box.
• This setting can be edited only when the unit is offline.
• Scene data other than that for components (such as power Standby/On) will be recalled regardless of
the settings in this dialog box.
 Component list
This shows all the components included in the scene. There is a check box at the left of each component; use
these to select the components that you want to be unaffected by a scene recall.
 [Select All] button
Selects the check boxes of all components.
 [Deselect All] button
Clears the check boxes of all components.
NOTE
Component list