Owner's Manual

15
Voice Categories
Voices can be organized into Category types and
assigned a two-letter Category code during the voice
Name operation. For a list of the available Category
types, see page 81.
Scenes
Each voice has two “Scenes”, or two distinct sounds
available for instant recall at the press of a [SCENE]
switch. Since the specific Scene on/off status is stored
as voice data, when you select a voice an LED beside
one of the [SCENE] switches will light to indicate which
Scene is active. (If both Scene LEDs light, the Scene
Control on status has been stored as part of the voice,
which means you can morph, or cross-fade between
Scenes using the assignable [MODULATION] wheel or
any other assigned continuous controller as you play.)
For more information about Scenes, see page 19.
Voice Name Display
As you edit a voice by turning the knobs or changing
parameters in the Edit menu, the information in the
screen changes accordingly. To display the voice name
and number in the LCD at any time, press [-] or [+]
once.
Voice Recall
If you’re editing a voice, and inadvertently select
another voice before performing a Voice Store
operation, or simply change your mind, you can recall
the most recently edited voice data using the Voice
Recall function. For more information, see page 96.
–
YES/ENTERNO
or
Press once
Indicates a voice
has been edited
but not stored.
Knob position settings 2
Knob position settings 1
Algorithm
Wave
Attack
Attack
ASSIGN 1 ASSIGN 2
ASSIGN 3
ASSIGN 4
PEG Decay
Wave
VCO1
Fine
Fine
PEG Sw
FM Src2
LFO2 Spd
PmodDepth PmodDepth
Level
LFO1 Wave LFO1 Spd
LFO1 Dly
PW
ASSIGN 5
ASSIGN 6 ASSIGN 7 ASSIGN 8
VCF
Cutoff
Sync
Pmod Sw
Sync Pitch
Pitch Pitch
PEG Depth
Decay
Decay
VCO2
Level
FM Depth
FM Src1
Sync Pitch
Depth
Sustain
Ring
Mod
Sustain
Sync Pitch
Src
Edge
Port Time
Edge
Release
Release
Noise
Level
PW
HPF
Feedback
VCF
PWM Depth
PWM Src PWM Src
PWM Depth
Type
Reso
nance
Volume
FEG
Depth
Fmod
Depth
Amod Depth
Vel
Sens
Key
Track
Vel Sens
Algorithm
Wave
Attack
Attack
ASSIGN 1 ASSIGN 2
ASSIGN 3
ASSIGN 4
PEG Decay
Wave
VCO1
Fine
Fine
PEG Sw
FM Src2
LFO2 Spd
PmodDepth PmodDepth
Level
LFO1 Wave LFO1 Spd
LFO1 Dly
PW
ASSIGN 5
ASSIGN 6 ASSIGN 7 ASSIGN 8
VCF
Cutoff
Sync
Pmod Sw
Sync Pitch
Pitch Pitch
PEG Depth
Decay
Decay
VCO2
Level
FM Depth
FM Src1
Sync Pitch
Depth
Sustain
Ring
Mod
Sustain
Sync Pitch
Src
Edge
Port Time
Edge
Release
Release
Noise
Level
PW
HPF
Feedback
VCF
PWM Depth
PWM Src PWM Src
PWM Depth
Type
Reso
nance
Volume
FEG
Depth
Fmod
Depth
Amod Depth
Vel
Sens
Key
Track
Vel Sens
CTRL
SCENE
Using The Controllers
The AN1x has various on-board controllers which let you
control specific parameters in real-time as you play.
Besides keyboard Initial and After Touch, these include
[PITCH] wheel, [MODULATION] wheel and [RIBBON]
controller, as well as the eight assignable CONTROL
knobs.
PITCH Wheel
The [PITCH] wheel lets you bend the pitch up or down
by an assignable amount. The pitch bend “depth”
(range) can be different for each Scene, as set in the
Control Matrix.
The pitch bend range can be different for each Scene in each voice. You can also
use the [PITCH] wheel to control other parameters. For information, see page 51.
MODULATION Wheel
The [MODULATION] wheel lets you apply varying
amounts of modulation to the sound as you play,
depending on assignment by the Utility Control Assign
function (see page 50) or in the Control Matrix (see
page 51).
You can also assign volume, pan or one of many other parameters to be
controlled by the [MODULATION] wheel. For information, see page 95. The
[MODULATION] wheel can also be used to “morph” between Scenes when the
Scene Control function is activated. For information, see page 20.
MODULATION
Maximum
Minimum
PITCH
Bends the pitch up
Bends the pitch down