User Manual

Synthesizer Arpeggiator & Drum Pad Owner’s Manual 11
Velocity
A measure length
Gate time
1
2
3
4
5
6 7
8
9
)
! @
$
1 LetsyoucopyallthePaddatafromPadtoPad.
OpenthePadEditwindowofthecopysource,
thentap[COPY].Next,openthePadEditwindow
ofthecopydestination,thentap[PASTE]to
executetheCopyoperation.
2 Clearsallnoteassignments.
3 Play:TappingthePadtransmitstheassigned
MIDInotemessagesonce.
Seq:TappingthePadstartsplaybackoftheStep
Sequencer,whichtransmitstheassignedMIDI
notemessages.
4 L:TheNotemessageistransmittedonlywhen
youtapthelefthalfsectionofthePad.
All:TheNotemessageistransmittedwhenyou
tapanylocationofthePad.
R:TheNotemessageistransmittedonlywhen
youtaptherighthalfsectionofthePad.
5 DeterminestheMIDITransmitChannel.
TosettheMIDITransmitChannel,taptheCh
valuetocallupthe“PadIndividualChannel”
switchinthewindow.
WhentheswitchisturnedtoOFF,theChissetto
Basicautomaticallyandthevaluespecifiedvia
thePadBasicTxChofUtilityissetastheMIDI
TransmitChannel.
WhentheswitchisturnedtoON,thechannel
selectoriscalledupandyoucanselectthe
channelfrom“1”to“16”and“Arp.”
WhentheArpisselected,Arpeggioplayback
istransmittedwhenARPON/OFFisturnedON
intheKeyboarddisplay.Inthiscase,thevalue
specifiedviatheKeyboardTxChofUtilityisset
astheMIDITransmitChannel.
6 TosettheNote,tapthedesiredkeyintheon-
screenkeyboard.
7 TosettheVelocity,taptheVelocityvalueor
valuestocallupthesliderthenadjusttheslider.
8 Clearsthenoteassignment.
9 Tappingherecallsuptheon-screenkeyboard
whichletsyoueditthePadname.
) Finalizesthesettingsthenclosesthewindow.
! DeterminestheNotelengthoftheStep
Sequencer.
@ Turnsonandoffeachmeasure(1–4)oftheStep
Sequencer.
# PinchinginandouthorizontallyadjuststheGate
Timeofallthenotes.
$ DraggingeachbarverticallyadjuststheVelocity.
Pad Edit window
Fromthiswindow,youcansettheMIDInotesassignedtothePad.Select“Play”or“Seq”(3),thenmakethesettings.
Pad Edit window with “Play”
Pad Edit window with “Seq”