Owner`s manual

3-11
BIMINI TOP
Raising from the fully collapsed storage
position.
1) With an assistant, raise the top and
secure the rear support poles to the
rear support pole mounts with the
lock pins.
2) Unzip and remove the storage
cover.
3) Unfold the top by pulling to the bow
of the boat.
NOTE: SX230 model shown. On the
AR230 model, collapse the front sup-
port poles to clear the wakeboard tower
as you pull the top forward. Extend the
poles again until the bottom sections
lock into their fully extended position.
4) Attach the snap hooks to the strap
eyes.
5) The top should be snug and wrinkle
free. If the top is too loose or too
tight, adjust the front straps by slid-
ing the buckle up or down the strap
as needed.
Do not exceed 45 mph (72 km/h) with
the Bimini top in the up position.
CAUTION:
OPERATION 3