Specifications

3-25
PERIODIC INSPECTION AND ADJUSTMENT x
3
INSP
ADJ
Lubrication points
1. Lubricate:
●
Throttle cable (throttle body end)
NOTE:
Before lubricating the QSTS control cables,
remove the QSTS cable housing cover. Spray
the rust inhibitor into the outer cables, and
apply grease to the inner cables.
2. Lubricate:
●
Nozzle pivot shaft
●
Steering cable (nozzle end)
●
QSTS cable (nozzle end)
3. Lubricate:
●
Steering cable
●
Steering cable joint
●
Shift cable
●
Shift cable joint
NOTE:
Disconnect the joints and apply a small amount
of grease.
Recommended lubricant:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
Recommended grease:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
Recommended grease:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)