Owner's Manual
Table Of Contents
CONNECTIONS
To the wall outlet with the
supplied power cable
(Asia and General models)
• VOLTAGE SELECTOR
(Asia and General models only)
The VOLTAGE SELECTOR on the rear panel
ofthis
unit
must be set for your local main voltage BEFORE plugging
the supplied power cable into the wall outlet.
Improper setting
of
the VOLTAGE SELECTOR may
cause damage to this unit and create a potential fire
hazard.
Rotate the VOLTAGE SELECTOR clockwise or
counterclockwise to the correct position using a straight
slot screwdriver.
Voltages are as follows:
Asia
modeL
AC 2201230-240
V,
50/60 Hz
General model AC 110/120/220/230-240
V,
50/60 Hz
• AC OUTLET(S) (SWITCHED)
U.K. and Australia models I outlet
Korea model None
Other models 2 outlets
Use these outlets to connect the power cables from your
other components to this unit. The power to the AC
OUTLET(S)
is
controlled
by
POWER on the front panel
of
this unit (or on the remote control). The outlet(s) supply
power to any connected component whenever the power
of
this unit
is
turned on. For information on the maximum
power (total power consumption
of
components), see
"SPECIFICATIONS" on page
15.
Do not connect components with a built-in amplifier, such as a
subwoofer, etc.
• Connecting the supplied power cable
Plug the supplied power cable into the AC
IN
on the rear
panel
of
this unit and then, plug the power cable into the
wall outlet after all other connections are complete.
8 En