Owner's Manual
Table Of Contents
CONTROLS
AND
FUNCTIONS
VOL
+/-
Control the sound output level.
This does not affect the REC level for recording,
G) Input selector buttons
Select the input source you want to listen to.
® Amplifier control buttons
INPUT
<J/c>
Select the input source you want to listen to.
® VOLUME
Control the sound output level.
This does not affect the REC level for recording.
cr'·>-
-----.,
@ PURE DIRECT and indicator
Reproduces any input source
in
the purest sound possible.
The indicator above
it
lights
up
when this function
is
turned on. See page
10
for details.
O-PllESET-O
BAND
AlBIC/OlE
a a
6
(5
5
<5
II
•
~
000
MUTE
Mute the sound output. Press MUTE again to resume the
audio output. Selected Input indicator blinks when the
sound
is
muted.
• Controlling other components
The functions
of
the buttons to control other Yamaha
components are the same as those
ofthe
corresponding
buttons on those components. Refer to the components'
instruction manuals for details.
® Yamaha tuner control buttons
Control various functions
of
Yamaha tuner. Refer to the
owner's manual
of
your tuner for details.
• Controlling this unit
CD
Infrared signal transmitter
Sends signals to the main unit.
® POWER
(I)
Turn on the unit.
".~.~
Noffl,54
This button
is
operational only when POWER on the front panel
is
pressed inward to the ON position.
Not
all
Yamaha tuners or functions can be controlled by this
remote control.
(]) Yamaha CD player control buttons
Control various functions
of
Yamaha CD player. Refer to
the owner's manual
of
your CD player for details.
~1/ailw
."'.=".,,~
Not all Yamaha CD players or functions can be controlled by this
remote control.
@ STANDBY
«(~)
Set this unit to the standby mode.
NoteiJ
.,
"
...
.;,;.;,>~
• This button
is
operational only when POWER on the front
panel
is
pressed inward to the ON position.
•
In
the standby mode, this unit consumes a small amount
of
power
in
order to receive infrared-signals from the remote
control.
I
3 En