Operation Manual

PRE-OPERATION CHECKS
4-2
4
NOTE:
_
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a very
short time; and the added safety it assures is more than worth the time involved.
_
EWA00033
WARNING
_
If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operating
the motorcycle.
_
Brake levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-26
Centerstand, sidestand
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
6-27
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Battery
• Check fluid level.
• Fill with distilled water if necessary.
6-29–6-31
ITEM CHECKS PAGE
U5MXE0.book Page 2 Thursday, December 20, 2001 2:08 PM