Operation Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
6-6
6
3. Remove the screws on cowling B.
4. Pull cowling A off as shown.
NOTE:
_
When removing cowling A, pull out on
the areas shown from bottom to top.
_
To install the cowling
1. Align the tabs in cowling A with the
slots of cowling B, and then push
cowling A into the original position.
NOTE:
_
When installing cowling A, push in on
the areas shown from top to bottom.
_
2. Install the screws on cowling B.
3. Install the screws on cowling A.
4. Install the license plate bracket by
installing the screws.
1. Screw (× 6)
2. Cowling B
U5MXE0.book Page 6 Thursday, December 20, 2001 2:08 PM