Manual
3 Press the button below of the main unit to
select the operation you want the unit to
learn.
4
_nt _ _n,tto m;ngi
Volume down VOLUME [] [] m [] [] m
Volume up VOLUME + [] [] [] [] [] m
Power on/standby (/) [] [] [] ,1!
mode
Point your TV remote control at the 1
remote control sensor and press the 2
respective button twice or three times
until the indicator changes from flashing
green to lit green.
5
6
Press
(1 sec) Flashes
rapidly [] [] j [] []
Success in learning [] [] m [] [] []
e.g.
Volume up
Fault in learning
The UNIVOLUME, CLEAR VOICE and
SURROUND indicators fhtsh in green
simultaneously for about 3 seconds.
Repeat steps 3 and 4 to make the unit
learn the other operations.
Press the d) button of the main unit for
more than 3 seconds to finish the remote
control learning mode.
Release the Q) button of the main unit when all the
indicators light up in green. The unit enters standby
nlode.
• The unit will automatically set to standby mode if the trait
in the remote control learning mode is left turned on for 5
minutes without any operation being perlormed.
• If learning fails, try again with your TV turned off. Note
that screen glare may disturb TV remote control learning.
3
4
Set the unit to standby mode.
Press both the INPUT
button and d) button of the DBD
DTS
main unit, release the (b _
button first, then release the t _
INPUT button. Flashes in
red
Press the INPUT button of the main unit
again for more than 3 seconds.
Release the INPUT button of the main unit
when ODD DTS indicator flashes.
Press the (/) button of' the main unit for more than 3
seconds to finish the remote control learning mode, or
to have the unit learn operations of another TV
remote control.
Should the unit freeze for any reason, this may be
remedied by initiating the factory settings.
1 Set the unit to standby mode.
2
3
Press and hold the (b button of the main
unit for more than 3 seconds.
All the indicator flashes in green.
IXI0
INPUT SURROUND CLEAR VOISE UNIVOLUME ors 013 PL_
..11.... Ill. .11, ..11. ..111. ,ill,
"/i"," "/i"," /i", "/i"," L"i"," / i","
Release the d) button of the main unit.
10 En