Owner's Manual

18
En
Bluetooth
The power of the
sound bar and of
the TV switch in
the opposite
direction. (For
example, the TV
is turned off if
the sound bar is
turned on.)
(when TV’s
re
mote control
learning function
is used)
The power of the TV was on when
you performed the learning
operation.
Press the power key on the TV and
(power) on the rear panel of the sound
ba
r to turn them on and then press the
power key on the TV’s remote control
to turn them off.
Problem Cause Remedy
Cannot make the
s
ound bar pair
with the
Bluetooth
device.
Bluetooth is not selected as the
input source.
Select Bluetooth as the input source.
The device does not support
A2
DP.
Perform pairing operations with a
device which supports A2DP.
A B
luetooth adaptor, etc., that you
want to pair with the sound bar
has a password other than
“0000.”
Use a Blu etooth adaptor, etc., whose
password is “0000.”
The sound bar and device are too
fa
r apart.
Move the device closer to the sound
bar.
There is a device (microwave
o
ven, wireless LAN, etc.) that
outputs signals in the 2.4 GHz
frequency band nearby.
Move the sound bar away from the
device that is emitting radio frequency
signals.
If the Blu
etooth device is equipped
with the wireless LAN function, turn off
the wireless LAN function, and turn on
the Bluetooth function only.
Another Blu
etooth device is
connected.
Terminate current Bluetooth
connection, and perform pairing with
the new device.
Cannot make a
Bluetooth
connection.
Another Bluetooth device is
connected.
The sound bar cannot make multiple
Bluetooth connections. Terminate
current Bluetooth connection, and
make connection for the desired
device.
More than nine devices are paired
an
d the oldest pairing information
is deleted.
Perform pairing again. The sound bar
can retain pairing information for up to
eight devices. When pairing a ninth
device, pairing data for the device with
the oldest connection date will be
deleted.
Cannot make a
Bluetooth
connection (the
BLUETOOTH
indicator
continues to
flash rapidly).
There is a problem within the
sound bar.
Unplug the power cable from the AC
wall outlet and contact the nearest
authorized Yamaha dealer or service
center.
No sound is
produced or the
sound is
interrupted
during playback.
The Bluetooth connection of the
sound bar with the device is
disconnected.
Perform Bluetooth connection
operations again (p.10).
Bluetooth i
s not selected as the
input source.
Select Bluetooth as the input source.
The sound bar and device are too
far
apart.
Move the device closer to the sound
bar.
There is a device (microwave
ove
n, wireless LAN, etc.) that
outputs signals in the 2.4 GHz
frequency band nearby.
Move the sound bar away from the
device that is emitting radio frequency
signals.
If the B
luetooth device is equipped
with the wireless LAN function, turn off
the wireless LAN function, and turn on
the Bluetooth function only.
The device is not set to send
Blu
etooth audio signals to the
sound bar.
Change the audio output setting and
connection setting on the device.
Playback on the device has not
be
en performed.
Perform playback on the device.
The device’s volume is set to
mi
nimum.
Turn up the device’s volume level.