UA English Front Surround System Français Español Owner’s Manual XXX EN
IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 8 9 Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC INFORMATION (for US customers) 1 2 3 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. • Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
• When not planning to use the remote control for long periods of time, remove the batteries from the remote control. • Do not charge or disassemble the supplied batteries. • The batteries shall not be exposed to excessive heat such as sunshine, fire or like. Radio waves may affect electro-medical devices. Do not use this unit near medical devices or inside medical facilities. The name plate is located on the bottom of the unit.
Contents IMPORTANT SAFETY INSTRUCTIONS ............ 2 Settings ..........................................................26 CAUTION: READ THIS BEFORE OPERATING YOUR UNIT....................................................... 4 Features ......................................................... 10 Configuring the HDMI control function................... 26 Configuring HDMI audio output ................................ 26 Enabling/disabling the auto power standby function ...................................
Supplied items Make sure you have received all of the following items. The unit Remote control A CR2025 Lithium battery has already been inserted into the remote control. Power cable Optical digital audio cable Mounting template Use when mounting the unit on a wall Analog audio cable (RCA plug (L/R)-3.
Preparing the remote control Operating range of the remote control Remove the battery’s insulating strip before attempting to use the remote control. Operate the remote control within the range as shown below. When the unit is mounted on a wall, point the remote control at the remote control sensor on the top panel (p. 14).
Replacing the battery in the remote control Press and hold the release tab in the direction indicated by A , and slide the battery holder out in the direction indicated by B .
Features This front surround system is easily installed and has a built-in subwoofer for enjoying powerful and realistic sound with connection to a TV or other devices. • Transmission of 4K high dynamic range (HDR) video supported Enjoy high-resolution video from a cable or satellite set-top box, or a BD/DVD player. When a TV that supports Audio Return Channel (ARC) is used, this ARC-compatible unit can be connected to the TV via a single HDMI cable (p. 16).
Frequently asked questions The following section covers popular functions and frequently asked questions about the unit. Q1 A1 Can I use the TV’s remote control to operate the unit? Q4 Can the brightness of the indicators be adjusted? Yes. When the unit is connected to a TV via HDMI cable, the TV’s remote control can be used to operate both the TV and the unit (p. 22). A4 Yes. Use the DIMMER key on the remote control (p. 21).
Part names and functions The unit (front panel/top panel) 1 2 3 4 5 3 (mute) key Mute the audio output. Press the key again to unmute (p. 21). 4 / (volume +/-) keys Adjust the volume (p. 21). 5 6 7 7 (power) key Turn on or off the unit (p. 19). HINT • The unit may automatically turn off when the auto power standby function is enabled (p. 27). 8 6 Speakers 6 1 Indicators The indicators on the top panel flash or glow, to show the operation and setting status.
The unit (rear panel) 9 0 a b SUBWOOFER OUT ANALOG TV OUT (ARC) c IN HDMI 9 SUBWOOFER OUT jack For connecting to an external subwoofer with an RCA mono cable (p. 18). 0 ANALOG input jack For connecting to an external device with an analog audio cable (RCA plug (L/R)-3.5 mm mini plug cable) (p. 17). a TV input jack For connecting to a TV with an optical digital audio cable (p. 16). d AC IN b HDMI OUT (ARC) jack For connecting to an HDMI-compatible TV (p. 16).
Installation The unit can be installed on a TV stand or mounted on a wall. Installing the unit on a TV stand, etc. Position the unit so that the keys are on the far side of the unit. Keys Cautions • Do not stack the unit and a BD player or other device directly on each other. Doing so may cause a malfunction due to vibrations. • Do not hold the speaker portion (fabric parts) on the front and the top of the unit. • The unit contains non-magnetic shielding speakers.
How to mount the unit on the wall Cautions • When mounting the unit on a wall, all installation work must be performed by a qualified contractor or dealer. The customer must never attempt to perform this installation work. Improper or inadequate installation could cause the unit to fall, resulting in personal injury. • To prevent the unit from falling, attach it to a wall constructed of drywall (plasterboard).
Connections a Connecting a TV and set-top box For the cable connection, follow the procedure below. 1 Audio signals Video signals OPTICAL OUTPUT HDMI INPUT 2 1 The digital audio/video signals from the settop box or BD/DVD player are input to this unit. 3 Cable, satellite or network set-top box, or BD/DVD player TV Use the optical digital audio cable (supplied) when connecting the unit to a TV that does not support Audio Return Channel. 1. Remove the cap HDMI OUTPUT 2 2.
b Connecting a game consol via the analog jack HINT Audio Return Channel (ARC) supported TV • Connect an HDMI cable to the audio return channel supported jack (the jack with “ARC” indicated) on TV. • Once the HDMI control function has been activated, video and audio content from playback devices can be output from the TV even when this unit is off (HDMI signal pass-through). • Enable the HDMI control function of this unit to activate the Audio Return Channel (ARC) (p. 26).
c Using an external subwoofer d Connecting the power cable The unit has dual built-in subwoofers; however you can connect an external subwoofer when you want to enhance low frequency sound. Connect a subwoofer to the SUBWOOFER OUT jack of the unit. Sound is output from both the built-in subwoofers and external subwoofer. After all connections are complete, connect the supplied power cable to the AC IN jack on the unit and plug the power cable into an AC wall outlet.
Operations 1 (power) key Remote control signal transmitter Turns on or off the unit. Transmits infrared signals. Turned on The indicator for the last input source selected glows. Turned off (Bluetooth standby function enabled, p. 25) 2 Input keys Select an input source to be played back. HDMI .................Sound from a device connected to the HDMI IN jack TV ......................TV audio or sound from a device connected to the unit’s TV input jack ANALOG ...........
3 SURROUND and STEREO keys Switch between surround and stereo (2 channel) playback. When surround playback is selected, you can enjoy a realistic sound effect. SURROUND ........ STEREO.............. SURROUND SURROUND Glows (surround playback) Off (stereo playback) HINT • The DPL indicator glows when 2-channel stereo signal is played in surround. • The TV Program, Movie, Music, Sports, or Glows Game surround mode can be selected (Dolby ProLogic II) using the HOME THEATER CONTROLLER app (p.
5 BLUETOOTH STANDBY key 7 DIMMER key Hold down the key for more than 3 seconds to enable/disable the Bluetooth standby function (p. 25). Change the brightness of the indicators. Each time the key is pressed, the brightness of the indicators changes as follows. Dim (default setting) → Off → Bright ↑ 6 Indicators glow brightly just after operation and change to the specified brightness after a few seconds. SUBWOOFER (+/–) keys Adjust the volume of the subwoofer.
Operating the unit by TV’s remote control (HDMI control) The HDMI control function (link function) coordinates operation of a TV and the unit so that the unit can be operated using the TV’s remote control. When a TV is connected to the unit with an HDMI cable (p. 16), the TV’s remote control can be used to perform the following operations. Coordinated functions via the TV remote control Remote control of TV (Example) 1. Turn on/off Both the TV and this unit turn on/off at the same time. 2.
Listening to the sound from a Bluetooth device 1 Press the BLUETOOTH key on the unit’s remote control to select Bluetooth as the input source. The BLUETOOTH indicator on the unit flashes. Audio from a Bluetooth device, such as a smartphone or a digital music player, can be played over a wireless connection. BLUETOOTH Flashes If a Bluetooth device has been connected before, the unit will connect to the last connected device when the BLUETOOTH key is pressed.
3 Select “ATS-1060 Yamaha” in the Bluetooth device list on the device. Terminating Bluetooth connection If a passkey (PIN) is required, enter the number “0000”. Bluetooth connection is terminated in the following cases. When the Bluetooth connection is terminated with the unit turned on, the BLUETOOTH indicator flashes and the unit enters the connection wait status.
Using the Bluetooth standby function The Bluetooth standby function allows you to turn on or off the unit automatically, linked with the operation of the Bluetooth device. 1 Using the HOME THEATER CONTROLLER app With the unit turned on, hold down the BLUETOOTH STANDBY key on the unit’s remote control for more than 3 seconds.
Settings Configuring the HDMI control function Follow the procedure below to enable or disable the unit’s HDMI control function. This function is enabled by default. 1 2 Configuring HDMI audio output Specify whether HDMI audio input signal will be played from the unit or the TV. NOTE Turn off the unit. Hold down the HDMI key on the unit’s remote control for more than 3 seconds. Holding down the HDMI key for 3 seconds switches function status between enabled and disabled.
Enabling/disabling the auto power standby function Enabling the auto power standby function prevents the unit from remaining on when not in use. NOTE • When the auto power standby function is enabled, the unit automatically turns off in any of the following situations. − No operations for 8 hours − No audio input and no operations for 20 minutes when BLUETOOTH or HDMI is selected as the input source. 1 2 Turn off the unit. Hold down the unit.
Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: 1 The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
Problem Cause Remedy The unit does not function correctly. The internal microcomputer is frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down the key on the unit for more than 10 seconds to turn on the unit. (If the problem persists, unplug the power cable from the AC wall outlet and plug it again.) The unit turns on by itself. Another Bluetooth device is being operated nearby.
Audio Problem No sound. Cause Another input source is selected. Remedy Select an appropriate input source (p. 19). The mute function is activated. Cancel the mute function (p. 21). The volume is too low. Turn up the volume (p. 21). The power cable of the unit is not connected properly. Make sure that the power cable of the unit is connected to an AC wall outlet securely (p. 18). Input jacks on a playback device are connected.
Problem No surround effect. Cause Stereo playback is selected. Remedy Select surround playback (p. 20). The volume is too low. Turn up the volume (p. 21). The TV or playback device is set to output 2 channel audio (such as PCM) only. Change the digital audio output setting on the TV or playback device to BitStream. Sound is also heard from the TV built-in speakers. Set the TV volume to minimum (p. 22). The listening position is too close to the unit.
Bluetooth Problem Unable to connect the unit to a Bluetooth device. No sound is heard or the sound is intermittent via the unit. 32 En Cause Bluetooth is not selected as the input source. Remedy Select Bluetooth as the input source (p. 23). The device does not support A2DP. Connect to a Bluetooth audio device that supports A2DP. A Bluetooth adaptor, etc. that you want to connect to the unit has a password other than “0000”. Use a Bluetooth adaptor, etc. whose password is “0000”.
Specifications Item Amplifier Section Maximum Rated Output Power Type Front L/R Section Tweeter Section Subwoofer Section Decoder Input Jacks Output Jack Item Specifications Specifications Front L/R 30 W x 2 ch Bluetooth version Ver. 2.1 +EDR Subwoofer 60 W Supported protocols Receiving: A2DP, SPP Acoustic suspension type Supported codecs Receiving: SBC, MPEG-4 AAC Wireless output Bluetooth Class 2 Range (line-of-sight) Approx.
HDMI signal Digital audio signal • Audio signals • Optical Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32–96 kHz, 16/20/24 bit CD, DVD-Video, DVDAudio, etc. Multi-ch Linear PCM 6ch, 32–96 kHz, 16/20/24 bit DVD-Audio, Blu-ray disc, HD DVD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc. • Refer to documentation supplied with the playback device, and set the device appropriately.
Bluetooth Bluetooth is a technology for wireless communication employing the 2.4 GHz frequency band, which can be used without a license. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Handling Bluetooth communications • The 2.
Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.