Front Surround System Owner’s Manual • Read the supplied booklet “Safety Brochure” before using the unit.
CONTENTS INTRODUCTION 4 BEFORE USING THE UNIT 6 6 Connecting to a network.. .............................. 19 Network functions................................................................................................ 19 Wired network connections................................................................................. 19 Wireless network connections.. .......................................................................... 20 Connecting to a network with the Sound Bar Controller app.. .
When any problem occurs (Network trouble).. ....... 50 Playing audio content using the Sound Bar Controller app.. ................................................. 33 Specifications.................................................... 52 Streaming services.. ............................................................................................ 33 Specifications.. .....................................................................................................
INTRODUCTION Information Indicates notes on instructions, restrictions on functions, and additional information that may be helpful. About functions included in the unit Amazon, Alexa, Amazon Music, Kindle and all related logos are trademarks of Amazon.com, Inc. or its affiliates. The services that can be used with this unit that are provided by third parties may be changed, suspended, or ended without notice. Please be aware that Yamaha Corporation does not bear any responsibility for these services.
• This manual uses the following signal words for the important information: – The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. WARNING This content indicates “risk of serious injury or death.” CAUTION This content indicates “risk of injury.
BEFORE USING THE UNIT Features Introduction This unit is a front surround system with its built-in subwoofers that allows for the enjoyment of superior sound quality from video played on a TV connected to the unit. n Ask Alexa to control the unit n Play surround sound Alexa, turn up the volume. Alexa, switch the input source to HDMI. Audio from a TV, media streaming service, or BD/ DVD player can be played with 3D surround sound/ surround sound.
n Easy operation using the smartphone app n Listen to audio from Bluetooth devices and streaming services Streaming services Bluetooth devices Sound Bar Controller Install the Sound Bar Controller app on either a smartphone or tablet. Various features and settings can be easily accessed and controlled via the app. Enjoy listening to audio from Bluetooth devices and streaming services* such as Amazon Music and Spotify. * A subscription may be required to listen to streaming services via this unit.
3D surround playback Bass Extension This unit supports virtual 3D surround sound technology called “DTS Virtual:X”. Surround sound can be heard not only from horizontal directions, but also from varying heights when this unit’s 3D surround mode is enabled, creating a virtual acoustic environment. This ultimately provides an immersive audio and sound experience by creating a sense of sounds not only coming from behind, but also above the listener.
Accessories Using the remote control Checking the accessories Preparing the remote control Make sure you have received all of the following accessories. Remove the battery insulating strip before attempting to use the remote control. The unit (ATS-1090) Remote control A CR2025 Lithium battery has already been inserted into the remote control.
Slide the cover out in the direction indicated [1], and replace the old battery with a new one [2]. Slide the rear cover back into place in the direction indicated [3]. Replacing the battery in the remote control [1] WARNING Rear cover • DO NOT SWALLOW THE BATTERY. • Keep new and used batteries away from children. • If the battery compartment does not close securely, stop using the product and keep it away from children. Slide the cover with holding these positions firmly.
Part names and functions Part names and functions of the front/top panel The part names and functions of the front and top panels are as follows. a g b h c d e f i j h a Indicators The indicators on the top panel flash or glow to show the operation and setting status. In this manual, indicator status, such as off, glowing, and flashing, are shown as the illustrations below. Off Glows Flashes g f z (power) b ) (Alexa) Manually wake Alexa to enable a voice command (p.24).
j Microphones Used to interact with Alexa. n NOTICE • Do not use a vacuum cleaner or aerosol air duster on the microphones when cleaning the unit. Doing so may damage the microphones. n NOTE • b, c, d, e and f are touch sensors. Touch icons with your finger to control functions. • Do not place any objects on the touch panel as doing so may result in unintended operations. • When touch panel control is disabled, no operations can be performed using the unit’s touch panel.
Part names and functions of the rear panel The part names and functions of the rear panel are as follows. a a Power connector Connect the power cord (p.18). b SUBWOOFER OUT jack For connecting to an external subwoofer with an RCA mono cable (p.18). c NETWORK jack For connecting to an ethernet cable (sold separately) (p.19). d TV input jack b c d e g g HDMI OUT (ARC) jack e UPDATE ONLY jack Use to update this unit’s firmware, if necessary. The jack is located inside the cover.
Part names and functions of the remote control The part names and functions of the supplied remote control are as follows. g | (mute) button a @ (Alexa) button a z HDMI TV BLUETOOTH h NET Manually wake Alexa to enable a voice command (p.24). h z (power) button b Input buttons b Select an input source to be played back. c • HDMI : Sound from a device connected to the HDMI IN jack (p.17) CLEAR VOICE 3D SURROUND i Mute the audio output (p.22).
PREPARATION 1 Installation Installing the unit n NOTICE • Do not stack the unit and any other device directly on each other. Doing so may cause a malfunction due to vibrations. • Do not apply excessive force to the unit when moving it. Doing so may damage the speakers or the portion covered with fabric. • The unit contains non-magnetic shielding speakers. Do not place magnetically sensitive items (hard disk drive, etc.) near the unit. Install the unit as shown in the following illustration.
2 Connecting a TV Connecting a TV that supports Audio Return Channel (ARC) n What is Audio Return Channel (ARC)? In order for the unit to play audio from a TV, the TV must usually be connected to the unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable that outputs video signals from the unit to the TV.
Connecting a TV that does not support Audio Return Channel (ARC) 3 Connecting AV devices HDMI connection with an AV device Connect the TV to the unit with an HDMI cable (sold separately) and an optical digital audio cable (supplied). Connect an AV device such as a media streaming device to the unit with an HDMI cable (sold separately). HDMI OUT (ARC) jack HDMI IN jack HDMI HDMI input jack HDMI HDMI output jack HDMI HDMI HDMI HDMI The unit (rear) OPTICAL O TV jack 1. Remove the cap.
4 5 Connecting to power Connecting an external subwoofer Connecting to power Connecting an external subwoofer Once all connections have been made, connect the unit to power as shown in the following illustration. The unit has dual built-in subwoofers; however you can connect a subwoofer equipped with built-in amplifier when you want to enhance low frequency sound. Power cord (supplied) Connect an external subwoofer to the unit via an RCA mono cable (sold separately).
Wired network connections 6 Connecting to a network To use a wired network connection, connect the unit to a router via an STP ethernet cable (CAT-5 or higher straight cable). Network functions A network connection allows you to play various streaming services via the unit, and to talk with Amazon Alexa to operate this unit, or to play music. Internet Router WAN The Sound Bar Controller app for mobile devices is required to configure and operate network functions.
Wireless network connections Connecting to a network with the Sound Bar Controller app Connect the unit to a wireless router (access point) to use a network. See the following for instructions on connecting to a wireless router (access point). Install the Sound Bar Controller app on your mobile device to connect the unit to a network. • “Connecting to a network with the Sound Bar Controller app” (p.20) n NOTE Internet • Confirm that your mobile device is connected to your home router before beginning.
2 Follow the app’s on-screen instructions to complete the settings. The * indicator on the unit glows when the unit is connected to a wireless network. Glows (White) n NOTE When the unit is connected to a network for the first time after purchase, the unit’s firmware is updated to the latest firmware version.
PLAYBACK Basic operations Basic procedure for playback 3 Basic procedure for playing back music is as follows. Use the input buttons to directly select an input source to be played.
5 6 Press VOLUME (+/-) to adjust the volume. The number of glowing indicators (other than the Alexa indicator) increases or decreases as volume is raised or lowered. Volume down (-) Adjust sound settings to suit individual preferences. n NOTE • For details on adjusting sound settings, see the following: – “Playback with 3D surround sound/surround sound” (p.27) – “Playback with 2-channel stereo sound” (p.27) – “Playback of human voices clearly (Clear Voice)” (p.
For example, just ask: Operating the unit using voice commands (Amazon Alexa) l Adjust the volume “Alexa, turn up the volume.” “Alexa, turn down the volume.” You can talk to Amazon Alexa on your unit. With Alexa, you can ask to play music, hear the news, check weather, control smart home devices, and more. l Switch input sources “Alexa, switch the input source to HDMI.” l Listen to streaming content from Amazon Music “Alexa, play some jazz music.
n NOTE • Amazon Alexa is a service provided by Amazon. This service may change, be discontinued, or be terminated without notice. Please note that Yamaha Corporation is in no way responsible for the continuation of this service, and will not be held liable for any issues that arise from the use of this service. • This service is limited to certain areas. • This service may not be available in some countries or regions. • Some functions require a third party service agreement.
Examples of Alexa indicator activity Status of Alexa The microphones are disabled. Glows red A system setting is changed. Glows orange An error occurred.
Enjoying your favorite sound Playback with 3D surround sound/ surround sound Selecting a surround mode The unit switches between 3D surround playback and surround playback each time 3D SURROUND is pressed. Select 3D surround playback or surround playback according to the input source or your individual preference. Select the surround mode best suited to the content by pressing MOVIE, TV, MUSIC, SPORTS, or GAME with 3D surround playback or surround playback enabled.
Playback of human voices clearly (Clear Voice) Enjoying enhanced bass sound (Bass Extension) Press CLEAR VOICE to turn on the clear voice function. Human voices such as dialogue in movies, TV shows, news, and sport commentary can be heard clearly. Press BASS EXT to turn on the bass extension function. You can enjoy enhanced bass sound and more powerful sound. Press the button again to disable the function. Press the button again to disable the function. The indicators will go off.
Using a Bluetooth® device Listening to audio from a Bluetooth® device 1 Press BLUETOOTH to select “Bluetooth” as the input source. The unit is ready for the Bluetooth connection, and the BLUETOOTH indicator on the unit flashes. Audio content from a Bluetooth device (such as a smartphone, tablet, laptop, or digital music player) can be played through this unit over a wireless connection.
3 4 Select this unit in the list. Play content with audio on the Bluetooth device. The unit’s name is displayed as shown in the following illustration. The unit will begin playing audio from the Bluetooth device. Yamaha ATS-1090 n NOTE When the connection between the Bluetooth device and the unit is established, a completion message is displayed on the Bluetooth device, and the BLUETOOTH indicator on the unit glows. • To terminate the Bluetooth connection, perform one of the following operations.
Useful features for playback a Using a TV’s remote control to operate the unit (HDMI control) Turn on/off Both the TV and the unit turn on/off at the same time. b Switch input sources The HDMI control function coordinates TV and unit operation so that the unit can be operated using the TV’s remote control. The unit's input source switches accordingly when the TV’s input source is switched.
Showing audio information and function settings c The type of audio signal being played, as well as settings for functions can be confirmed by the status of indicators. d 1 Show the bass extension function setting. Glows: Enabled Off: Disabled Show the Bluetooth function setting. Glows: Enabled Off: Disabled Press INFO. n NOTE The Bluetooth function setting is not shown while audio content is playing from a Bluetooth device or over a network.
Playing audio content using the Sound Bar Controller app Streaming services Audio content distributed by various streaming services over the Internet can be played via the unit. Use the dedicated app for mobile devices provided by a particular streaming service or talk to Amazon Alexa to select content to play from a streaming service. See the product information page on the Yamaha website for information on services supported by the unit.
CONFIGURATIONS Configuring various functions Once the indicators have shown the brightness setting applied to the unit as follows, the unit will turn on. Changing the brightness of the indicators (Dimmer) • Dim (default setting) Change the brightness of the indicators on the unit. The brightness is dim by default. 1 2 Turn off the unit. Glow • Off Press and hold MUSIC for at least five seconds. The brightness setting of the indicators is changed.
Configuring the HDMI control function 1 2 Enable or disable the unit’s HDMI control function (link function). This function coordinates TV and unit operation so that the unit can be operated using the TV’s remote control. Turn off the unit. Press and hold HDMI for at least five seconds. The HDMI control function is enabled or disabled. This function is enabled by default. HDMI Once the indicator has shown the HDMI control function setting applied to the unit as follows, the unit will turn on.
Configuring HDMI audio output 1 2 Select the device from which audio input via the unit’s HDMI IN jack will be played when the HDMI control function is disabled. HDMI audio is output from this unit by default. The unit (default) Play HDMI audio input signal from the unit. TV Play HDMI audio input signal from the TV. Turn off the unit. Press and hold 3D SURROUND for at least five seconds. The HDMI audio output setting is changed.
Setting the auto power standby function 1 2 Enabling the auto power standby function prevents the unit from remaining on when not in use. When the auto power standby function is enabled, the unit automatically turns off in any of the following situations. Turn off the unit. Touch and hold y and then touch and hold z on the unit for at least five seconds. The auto power standby function is enabled or disabled.
Enabling/disabling touch panel control (Child Lock function) 1 2 Disable touch panel control to prevent children from accidentally operating the unit. Touch panel control is enabled by default. Turn off the unit. Press and hold INFO for at least five seconds. The touch panel control is enabled or disabled. INFO Once the indicator has shown the touch panel control setting applied to the unit as follows, the unit will turn on.
Enabling/disabling the network standby function 1 2 Enabling the network standby function allows the unit to be turned on or off using a mobile or Bluetooth device as follows. This function is enabled by default. Turn off the unit. Press SPORTS for at least five seconds. The network standby function is enabled or disabled. • The unit can also be turned on and off using the Sound Bar Controller app installed on your mobile device.
Enabling/disabling the wireless (Wi-Fi) function Enabling/disabling the Bluetooth function Enable or disable the wireless (Wi-Fi) function. This function is enabled by default. Enable or disable the Bluetooth function. This function is enabled by default. 1 2 1 2 Turn off the unit. Press and hold NET for at least five seconds. Turn off the unit. Press and hold BLUETOOTH for at least five seconds. The wireless (Wi-Fi) function is enabled or disabled. The Bluetooth function is enabled or disabled.
Updating the unit’s firmware Selecting the HDMI signal format New firmware that provides additional features or product improvements will be released as needed. Firmware can be updated using the Sound Bar Controller app installed on a mobile device. Problems such as a lack of sound or the appearance of abnormal colors in a video may occur when some AV devices are connected to the unit. Should this occur, changing the setting may resolve these issues.
Initializing the unit Setting the dynamic range compression Reset the settings of the unit to the factory presets. Select the dynamic range compression level. 1 2 This function is set to “No compression” by default. Turn off the unit. 1 2 Touch and hold } and z on the unit until all indicators except the Alexa indicator flash. Turn off the unit. Use the remote control to select the desired compression level.
The indicators show the compression level applied for several seconds. Compression level Indicators Compression (maximum) Compression (standard) Glows (white) No compression Glow (white) n NOTE Press INFO to confirm the dynamic range compression level applied to the unit. For details, see the following: • “Showing audio information and function settings” (p.
APPENDIX When any problem occurs (General) When any problem occurs (Power and system function) Check the following first: The power turns off suddenly Refer to the following when the unit does not function properly. • The power cords of the unit, TV and AV devices are connected to AC wall outlets securely. l The auto power standby function activated.
The power cannot be turned on The unit does not function correctly l The protection circuitry has been activated three times consecutively. To protect the product, the power cannot be turned on. Unplug the power cord from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center. l The internal microcomputer is frozen due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage.
l A communication error between the unit and connected device has occurred. A communication error may occur depending upon the generation of the device connected to the unit. See the following if such an error occurs: – “Selecting the HDMI signal format” (p.41) l The TV does not support HDCP version 2.2/2.3. Connect the unit to the HDMI input jack on an HDCP v2.2/2.3compliant TV when playing video content that requires an HDCP v2.2/2.3-compliant device. l The batteries are weak. Replace with new batteries.
l The TV does not support the unit’s functions. Even if your TV supports the HDMI control function, some functions may not be available. For details, see documentation supplied with your TV. l The mute function is activated. Cancel the mute function. For details, see the following: – “Basic procedure for playback” (p.22) l The volume is too low. Turn up the volume. For details, see the following: – “Basic procedure for playback” (p.22) Alexa will not operate the unit l Alexa is not properly configured.
l Sound from an HDMI control-enabled TV is set for output from the TV’s built-in speakers. Use the TV’s HDMI settings to set audio output to any option other than the TV’s built-in speakers. l The volume is too low. Turn up the volume. For details, see the following: – “Basic procedure for playback” (p.22) No sound is coming from the subwoofer l The TV or AV device is set to output 2-channel audio (such as PCM) only.
No sound can be heard or the sound cuts off intermittently from a Bluetooth® device When any problem occurs (Bluetooth®) The unit cannot be connected to a Bluetooth® device l The volume on the Bluetooth device may be too low. Raise the volume on the Bluetooth device. l Bluetooth is not selected as the input source. Select Bluetooth as the input source. For details, see the following: – “Listening to audio from a Bluetooth® device” (p.29) l Bluetooth is not selected as the input source.
Wireless network is not found When any problem occurs (Network trouble) l Microwave ovens or other wireless devices might disturb the wireless communication. Turn off these devices or move them farther away from the unit and wireless router. The network feature does not function l Access to the network is restricted by the firewall settings of the wireless router (access point). Check the firewall setting of the wireless router (access point).
l The mobile device is not connected to the wireless router over a wireless connection. Connect the mobile device to the wireless router over a wireless connection. l The unit is connected to a multiple SSID router. The router’s network splitter may be blocking access to the unit. Connect the unit and mobile device to a network with the same SSID. Try connecting to the primary SSID first. l The wireless (Wi-Fi) function is disabled. Enable the wireless (Wi-Fi) function.
Specifications Specifications Subwoofer The specifications of the unit are as follows. • Driver • Type • Frequency response Amplifier section • Impedance Maximum rated output power • Front L/R • Subwoofer 60 W Supported audio signal (HDMI/optical input) • Frequency response • Impedance 62 Hz to 170 Hz 3 Ω (6 Ω × 2) PCM (up to 5.1ch) Dolby Digital (up to 5.1ch) DTS Digital Surround (up to 5.1ch) Front L/R • Driver 7.
Bluetooth Wi-Fi function Function Sink function (source device to this unit) • Wireless LAN standards • Radio frequency band Bluetooth version Ver 4.2 Supported profiles A2DP Supported codecs Sink function: SBC, AAC Bluetooth class • Available security method 2.4 GHz WEP, WPA2-PSK (AES), Mixed Mode [U.K. and Europe models] • Radio frequency 2.4 GHz band 2402 MHz to 2482 MHz (20 MHz) • Maximum output power (EIRP) Bluetooth Class 2 2.4 GHz band Range (line-of-sight) IEEE802.11b/g/n 18.
Supported HDMI audio and video formats Standby power consumption • [U.S.A., Canada, Taiwan and Mexico models] – HDMI control off, network standby off – HDMI control off, network standby on (Wired/Wi-Fi/ Bluetooth) The following HDMI audio and video formats can be used by the unit. 0.2 W Audio signals 1.7/1.9/1.7 W – HDMI control on, network standby off 0.6 W – HDMI control on, network standby on 2.2 W Audio signal types • [U.K.
Copyright protection standard Supported digital audio formats This unit supports HDCP version 2.3. n NOTE The following digital audio formats can be used by the unit. • Refer to documentation supplied with the AV device, and set the device appropriately. • When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the DVD player. • The unit is not compatible with HDCP-incompatible HDMI or DVI devices.
Information for qualified contractors or dealers Mounting the unit on a wall 1 Mount the unit on a wall using the screw holes on the rear panel. Attach the mounting template (supplied) on a wall and mark for the screw holes. Mounting template (supplied) CAUTION • Please have a qualified contractor or dealer when mounting the unit on a wall. Some skills and experience are required for safe installation. • To prevent the unit from falling, attach it to a wall constructed of drywall (plasterboard).
3 Peel off the backing paper from the spacers (supplied) and attach the adhesive face to the bottom of the unit. Spacers 4 Hang the unit on the screws.
Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.