User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
Enabling/disabling the wireless (Wi-Fi)
function
Enable or disable the wireless (Wi-Fi) function.
This function is enabled by default.
1
Turn off the unit.
2
Press and hold NET for at least five seconds.
The wireless (Wi-Fi) function is enabled or disabled.
NET
Once the indicator has shown the wireless (Wi-Fi) function
setting applied to the unit as follows, the unit will turn on.
Glows (enabled)
Off (disabled)
n NOTE
Press INFO to confirm whether the wireless (Wi-Fi) function is enabled or disabled. For
details, see the following:
• “Showing audio information and function settings”(p.32)
Enabling/disabling the Bluetooth
function
Enable or disable the Bluetooth function.
This function is enabled by default.
1
Turn off the unit.
2
Press and hold BLUETOOTH for at least five seconds.
The Bluetooth function is enabled or disabled.
BLUETOOTH
Once the indicator has shown the Bluetooth function setting
applied to the unit as follows, the unit will turn on.
Glows (enabled)
Off (disabled)
n NOTE
Press INFO to confirm whether the Bluetooth function is enabled or disabled. For details,
see the following:
• “Showing audio information and function settings”(p.32)
En
40