User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE UNIT
- PREPARATION
- PLAYBACK
- CONFIGURATIONS
- Configuring various functions
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression
- Configuring various functions
- APPENDIX
- When any problem occurs (General)
- When any problem occurs (Power and system function)
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the unit’s touch panel
- All indicators go out although the unit is turned on (it may seem that the unit is turned off)
- The unit does not function correctly
- The unit turns on by itself
- The TV’s 3D glasses do not work
- HDMI video is not displayed correctly on TV screen
- When the unit is turned off, video and/or audio from an AV device are not output to the TV
- The unit cannot be operated using the remote control
- The TV cannot be operated using the TV’s remote control
- The unit cannot be operated using the TV’s remote control
- Alexa will not operate the unit
- Alexa does not respond when summoned.
- When any problem occurs (Audio)
- When any problem occurs (Bluetooth®)
- When any problem occurs (Network trouble)
- Specifications
- Information for qualified contractors or dealers
Specifications
Specifications
The specifications of the unit are as follows.
Amplifier section
Maximum rated output power
• Front L/R 30 W × 2ch
• Subwoofer 60 W
Speaker section
Front L/R
• Type
Acoustic suspension type
(non-magnetic shielding)
• Driver 5.5 cm (2-1/8") cone × 2
• Frequency response 170 Hz to 22 kHz
• Impedance 6 Ω
Tweeter
• Type Magnetic shielding type
• Driver 2.5 cm (1") dome × 2
• Frequency response 5 kHz to 23 kHz
• Impedance 6 Ω
Subwoofer
• Type Bass reflex type (non magnetic shielding)
• Driver 7.5 cm (3") cone × 2
• Frequency response 62 Hz to 170 Hz
• Impedance 3 Ω (6 Ω × 2)
Decoder
Supported audio signal
(HDMI/optical input)
PCM (up to 5.1ch)
Dolby Digital (up to 5.1ch)
DTS Digital Surround (up to 5.1ch)
Input jacks
HDMI 1 (HDMI IN)
Digital (optical) 1 (TV)
Output jacks
HDMI 1 (HDMI OUT (ARC))
Analog (RCA/monaural) 1 (SUBWOOFER OUT)
Other jacks
USB 1 (UPDATE ONLY)
LAN 1 (NETWORK)
En
52