User Manual

6 Connecting to a network

Network functions

A network connection allows you to play various streaming services via

the unit, and to talk with Amazon Alexa to operate this unit, or to play

music.

The Sound Bar Controller app for mobile devices is required to configure

and operate network functions.

n NOTICE

• Do not connect this product to public Wi-Fi and/or Internet directly. Only connect

this product to the Internet through a router with strong password-protections.

Consult your router manufacturer for information on security best practices.

n NOTE

• To use network function, the unit and mobile device must be connected to the same

router.

• When using a multiple SSID router, access to the unit might be restricted depending on

the SSID to connect. Connect the unit and mobile device to the same SSID.

• Some security software installed on your computer, or network device settings (such

as a firewall), may block the unit’s access to streaming services. Should this occur,

change security software and/or network device settings.

• A network connection cannot be established if the MAC address filter on your router is

enabled. Check your router’s settings.

• To configure your router’s subnet mask manually, apply the same subnet used by this

unit to all devices.

• Use of a broadband connection is recommended when using Internet services.

• The unit cannot be connected to a network that requires manual setup. Connect the

unit to a DHCP enabled router.

Wired network connections

To use a wired network connection, connect the unit to a router via an

STP ethernet cable (CAT-5 or higher straight cable).

LAN

WAN

Internet

Mobile device

Modem

STP ethernet cable

(sold separately)

Router

NETWORK jack