User Manual

Updating the unit’s firmware

New firmware that provides additional features or product

improvements will be released as needed. Firmware can be updated

using the Sound Bar Controller app installed on a mobile device.

n NOTICE

• Do not operate the unit or disconnect the power cord or network cable during

firmware update.

• If the Internet connection speed is slow, or the unit is connected to the wireless

network, network update may not be possible depending on the condition of the

network connection. Should this occur, try again at a later time.

• For details on update, visit the Yamaha website.

When a new firmware is released, a “NEW” icon is displayed on the

screen of the Sound Bar Controller app. Tap the icon, then follow the on-

screen instructions to update the firmware.

Selecting the HDMI signal format

Problems such as a lack of sound or the appearance of abnormal colors

in a video may occur when some AV devices are connected to the unit.

Should this occur, changing the setting may resolve these issues.

Mode 1 (default) Select this mode in most cases.

Mode 2

Select this mode if problems such as the appearance of

abnormal colors in video have occurred.

Turn on the unit.

Press STEREO for at least five seconds.

STEREO

Once the indicator has shown the setting applied to the unit

as follows, the unit will turn on.

Glows (mode 1)

Off (mode 2)