Drum Trigger Module Owner’s Manual Features of the DTX-PRO page 8 Contents page 9 Specifications page 66 EN
For DTX-PRO SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind.
For AC adapter and DTX-PRO FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
For AC adaptor Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the bottom of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. For the AC adaptor WARNING CAUTION • This AC adaptor is designed for use with only Yamaha electronic instruments. Do not use for any other purpose. • Indoor use only. Do not use in any wet environments. • When setting up, make sure that the AC outlet is easily accessible.
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/AC adaptor Connections • Do not connect the instrument to an electrical outlet using a multipleconnector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet.
NOTICE Information To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. About copyrights Handling • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.
MEMO DTX-PRO Owner’s Manual 5
Welcome Thank you for purchasing this Yamaha DTX-PRO. The DTX-PRO is a drum trigger module that you can use for playing electronic drum kits and drum pads at homes, studios or live venues. To get the most out of your DTX-PRO, be sure to read this Owner’s Manual carefully. And after reading through this manual, be sure to store it in a safe place so that you can refer back to it again as needed.
About the Manuals The following manuals are provided for using the DTX-PRO. These manuals are intended for users of the DTX-PRO. Printed Manual Owner’s Manual (this book) Setup Guide Explains how to attach and setup the DTX-PRO for producing sound. Basic Guide Describes the fundamentals needed to operate the DTX-PRO. Application Guide Describes parameter settings and other more advanced uses. Reference Describes troubleshooting techniques and contains other reference materials.
Features of the DTX-PRO Intuitive operation for playing your ideal drum sounds Includes natural drum sounds with real ambience, played by top studio drummers and recorded in renowned studios, including Real World Studios. Includes unique KIT MODIFIERS giving you intuitive control of Ambience, Comp, and Effects—the core elements of the drum sound creation (page 30). Equipped with a high-quality headphone amplifier that delivers high fidelity reproduction of all drum sounds.
Contents PRECAUTIONS 2 Welcome 6 Included Accessories 6 About the Manuals 7 Printed Manual.............................................................................. 7 Digital Manual (PDF) .................................................................... 7 Features of the DTX-PRO Panel Controls and Functions 8 10 Top Panel ................................................................................... 10 Front Panel ......................................................................
Panel Controls and Functions Top Panel KIT MODIFIER knobs Adjust the amount of Ambience (the background sounds of the location), Comp (the punchiness or loudness of the sound), Effect (other effects assigned to the Kit) [AMBIENCE] knob [COMP] knob [EFFECT] knob Structure of the Kit (page 23) Adjusting (Modifying) the Sound Effects (page 30) [–][+] knob [–] button [+] button Increases or decrease the value(s).
Panel Controls and Functions Display Function Buttons 1–3 ([F1], [F2], [F3]) How to read the KIT screen Selects the functions that appear at the bottom of each screen. NOTICE About the “ ” mark: The mark appears in the upper right of the screen when the Kit or click settings have been changed. This is to remind you that the settings have changed but have not yet been saved (Store). The mark disappears when you store the settings (page 37).
Panel Controls and Functions Front Panel [ Standard stereo phone plug (6.3 mm) ] (Headphone) jack (page 16) For connecting headphones. This output jack is a standard stereo phone plug (6.3 mm). Use a 3.5 mm stereo mini to (6.3 mm) stereo adaptor to connect headphones or earphones with a stereo mini plug (3.5 mm) to the [ ] jack. CAUTION Stereo mini plug (3.5 mm) [ ] (auxiliary input) jack Connect to the headphone jack on a smart phone or portable music player.
Panel Controls and Functions Rear Panel TP70 XP80 PCY135 Trigger Input jacks [!4] jack to [qSNARE] jack [MIDI OUT] connector Connects a MIDI device to send MIDI messages from the DTX-PRO. Connects the DTX series pads. To connect the pads included in your Drum Kit, refer to the Assembly Manual. These trigger input jacks also accept separately sold add-ons. For more information, see “About the Trigger Input Jacks” (page 57). Standard stereo phone plug (6.3 mm) MIDI cable Standard phone plug (6.
Setup Guide Preparations This provides information on setup and initial settings in preparation for playing. Workflow Installing the DTX-PRO Connecting the AC adaptor Connecting Headphones Turning On Initial Setup (Trigger Setup Wizard) This completes set up. Installing the DTX-PRO First, install the DTX-PRO. There are three different ways of installation as shown below. Attach the DTX-PRO onto the rack of your drum kit. (For more information, refer to the Assembly Manual.
Setup Guide Installing the DTX-PRO Connecting the AC adaptor WARNING Only use the specified AC adaptor (page 66). Using a different AC adaptor can cause malfunction, overheating, fire, and other problems. This may void the warranty so please take careful note. CAUTION Locate the DTX-PRO close to an AC outlet. If you notice any abnormalities during operation, turn the power off immediately and unplug the AC adaptor. 1.
Setup Guide Installing the DTX-PRO 4. Hook the AC adaptor’s cord around the cord hook to secure it in place. CAUTION Excessive bending can damage the AC adaptor cord and create a fire hazard. Ensure, therefore, that the power cord is not bent at an extreme angle when wrapped around the hook. AC adaptor cord Cord hook 5. Plug the AC adaptor’s AC plug into a domestic power outlet.
Setup Guide Turning On or Off Turning On or Off Turning On 1. Turn the [MASTER VOLUME] knob fully counterclockwise to lower the DTX-PRO volume to its minimum. 2. Press the [ ] (Standby/On) switch. Initial Setup (Trigger Setup Wizard) When you turn on your DTX-PRO for the first time, the Initial Setup page will be displayed. On this page, you will be required to specify the following.
Setup Guide Turning On or Off Turning Off NOTICE • The DTX-PRO automatically stores settings when the power is turned off, so do not unplug the AC adaptor until the LCD screen is turned off completely. • Unsaved Kit data will be lost, so always save (Store) data before turning the power off. 1. If you are connected to a PA system: Turn the external speakers off. Power off 2. Turn the [MASTER VOLUME] knob fully counterclockwise to lower the volume to its minimum. 3.
Setup Guide Changing the Overall Settings Changing the Overall Settings Auto Power-Off The Auto Power-Off function automatically turns off the DTX-PRO after a certain period of inactivity. The factory default is set at 30 minutes. NOTICE • Unsaved data is lost when the DTX-PRO is turned off with the Auto Power-Off function. Always store data before turning the power off. • In certain modes of operation, the Auto Power-Off function will not turn off the DTX-PRO when the set time has elapsed.
Setup Guide Changing the Overall Settings Restoring DTX-PRO Settings to the Factory Defaults (Factory Reset) Use the Factory Reset function to restore the DTX-PRO’s settings to their factory defaults, even if you have accidentally overwritten them. NOTICE A factory reset overwrites any settings you have made with the corresponding factory defaults. Save any important userdefined data to a USB flash drive before carrying out a factory reset. For more information, refer to the Reference Manual (PDF).
Setup Guide Using a USB Flash Drive Using a USB Flash Drive Connect a USB flash drive to the [USB TO DEVICE] terminal on the rear panel of the DTX-PRO and record your performance directly to the USB flash drive. Also, you can save DTX-PRO settings to and load settings from a USB flash drive. Connecting a USB Flash Drive to the DTX-PRO Precautions When Using the [USB TO DEVICE] Terminal When connecting a USB flash drive to the [USB TO DEVICE] terminal, be sure to follow the important precautions below.
Setup Guide Using a USB Flash Drive Formatting the USB Flash Drive Some USB flash drives should be formatted with this instrument before they can be used. For information on how to format the USB flash drive, refer to the Reference Manual (PDF). (MENU/File/Format) NOTICE The format operation erases any previously existing data. Make sure that the USB flash drive you are formatting does not contain any important data.
Basic Guide Structure of the Kit A Kit is a combination of drum set sounds and the sound modifier settings that enhance the sounds, such as Ambience, Comp (Compressor) and Effects. This drum trigger module contains numerous sets of preset kits, and you can change the drum set sounds by selecting another kit or by changing the sound modifier settings.
Basic Guide Playing the Pads Playing the Pads To play the Inst sounds, strike the pads connected to the DTX-PRO. You can play different sounds by striking different sections (or “Zones”) of the pad, depending on the number of zones available on the pad. When position sensing is available, you can express a subtle nuance by striking different locations within a Zone.
Basic Guide Playing the Pads Snare and Tom Strike different sections of the pad in the same way you would play an acoustic snare drum or tom. With the snare pad (the pad with position sensor connected to the qSNARE jack), you can create natural tonal changes according to the location within the Zone. Head shots Strike the main surface of the pad to produce a conventional head hit sound.
Basic Guide Playing the Pads Hi-hats Strike different sections of the pad in the same way you would play an acoustic hi-hat cymbal. Open/Close • You can produce an open hi-hat sound by striking the hi-hat pad with the hi-hat controller’s pedal fully open. • You can produce a closed hi-hat sound by striking the hi-hat pad with the hi-hat controller’s pedal fully pressed. HH65 • Different hi-hat sound is produced depending on the how much the pedal is opened or pressed.
Basic Guide Playing the Pads Cymbals Strike different sections of the pad in the same way you would play an acoustic cymbal. With the ride cymbal (the pad with position sensor connected to the iRIDE jack), you can create natural tonal changes according to the location within the Zone. Bow shots Striking the main surface of the cymbal pad (i.e., the bow section located between the cup and edge) produces a bow shot sound.
Basic Guide Playing the Pads Muting Front side on the outer edge Striking the pad while holding the front side of the outer edge will produce a muted sound. *2 Crash cymbal pad included in the DTX6K-X kit: Grasping the sensor area of the cymbal pad immediately after striking it will mute the sound being produced. *4 *2 The front side of the pad is indicated by the Yamaha logo. *3 With the crash cymbal pad included in the DTX6K-X kit, the bow shots, the edge shots and the bell shots play the same sound.
Basic Guide Basic Operation of the DTX-PRO Basic Operation of the DTX-PRO Selecting a Kit 1. Press the [KIT] button. The KIT screen appears. Kit number Kit name * This screen is shown when multi-piezo pads are connected. P***: Preset Kits (Presets that are already stored in the DTX-PRO) U***: User Kits (Kits you have created) 2. Use the [–][+] controllers to select a kit.
Basic Guide Basic Operation of the DTX-PRO Adjusting (Modifying) the Sound Effects Maximum: All lit [AMBIENCE] knob Adjusts the amount of ambience or the reflective sounds of the virtual room [COMP] knob Adjusts the amount of compression or the amount of the punchiness or loudness of the sound [EFFECT] knob Adjusts the amount of other effects assigned to the Kit The type of the effect controlled with the [EFFECT] knob can be changed from the button below “MIX/FX” ([F3]).
Basic Guide Basic Operation of the DTX-PRO How to Use the Mixer Use the mixer to adjust the overall volume balance of the pads. NOTE • The mixer setting is retained after switching to another Kit. • The mixer setting is not saved as a Kit setting. 1. Press the button below “MIX/FX” (F3). The MIXER screen appears.
Basic Guide Basic Operation of the DTX-PRO Changing the Effect Type and Amount of Effect to Apply You can set a different effect type or change the amount of the effect that you control with the [EFFECT] knob. Master Effect (effect applied to the overall sound), Effect 1 and Effect 2 (effects whose amounts can be set independently for each Inst) are available. 1. Press the button below “MIX/FX” ([F3]). MIXER screen appears. 2. Press the button below “EFFECT” ([F3]). 3.
Basic Guide Basic Operation of the DTX-PRO 4. Use the [–] [+] controllers to select the effect type. or For Effect 1 and Effect 2: Set the amount of effect to apply to each Inst. q Strike the pad whose instrument effect you wish to change. The pad name appears on the upper right corner of the screen. w Press the button below “ ” ([F1]) to move the cursor to “InstSend.
Basic Guide Basic Operation of the DTX-PRO e Use the [–] [+] controllers to set the amount of effect to apply. or To set Effect 1 and Effect 2, you can use the graphic overview for adjusting the setting of each pad. 1. Press the button below “ ” ([F2]). Setting screen appears. Cursor position 2. 3. Strike a pad or use the buttons below “ ” and ” ” ([F1] and [F3]) to select a pad, and use the [–] [+] controllers to set the amount of effect to apply.
Basic Guide Changing the Drum Set Sound (Building Your Own Drum Set) Changing the Drum Set Sound (Building Your Own Drum Set) With the DTX-PRO, you can build your own drum set by changing the drum set sound within the Kit. By changing the Inst settings, you can customize the drum set sound, in the same way as you would with an acoustic drum set.
Basic Guide Changing the Drum Set Sound (Building Your Own Drum Set) 2. Strike the drum pad for which you wish to change the settings. The pad name appears on the upper right corner of the screen. 3. Use the buttons below “ ” and “ and [F2]) to select the item. ” ([F1] Inst Category name The first page: The Inst Selection screen appears. Inst number and Inst name The second page: The Inst Setting screen appears.
Basic Guide Changing the Drum Set Sound (Building Your Own Drum Set) Using Imported Sounds (.wav) You can import audio files (.wav) into the DTX-PRO to use as Inst sounds. For more information on importing audio files and settings, refer to the Reference Manual (PDF). For more information on using a USB flash drive, see “Using a USB Flash Drive” (page 21). Saving a Customized Kit under a New Name 1. Press the [STORE] button. The KIT STORE screen appears.
Basic Guide Changing the Drum Set Sound (Building Your Own Drum Set) 4. After entering all characters, press the button below “OK” ([F2]) and return to the STORE screen. 5. Use the [–] [+] controllers to select a User Kit Number to store your Kit to. or 6. After confirming the new Kit Number and Kit Name, press the button below “STORE” ([F3]). NOTE You cannot save an edited Kit to a Preset Kit. NOTICE When overwriting a Kit, the current Kit settings are replaced with the new settings.
Basic Guide Using the Click (Metronome) Using the Click (Metronome) Practicing your drumming along with the click (metronome) sounds helps you perfect your rhythms. Starting and Stopping the Click 1. Press the [START/STOP] button to start the Click. Click sounds are played at the tempo shown in the Click Tempo display. The lamp next to the [START/STOP] button flashes in sync with the tempo while the Click sounds. 120 2. To stop the click, press the [START/STOP] button again.
Basic Guide Creating Your Own Click (Metronome) Settings Creating Your Own Click (Metronome) Settings Set the Click (metronome) tempo, volume, etc. 1. Press the [CLICK] button. The CLICK screen appears. Timer settings Volume settings for individual click timing Click number Click name Setting the Tempo by Tapping the Button (Tap Tempo) Tap the button at the desired tempo to set the tempo. 2. Changing the Volume of the Individual Click Timing 2. Press the button below “VOLUME” ([F2]).
Basic Guide Creating Your Own Click (Metronome) Settings Saving the Customized Click Setting under a New Name The Click settings you have customized can be saved in the same way as saving a kit. See “Saving a Customized Kit under a New Name” (page 37). Using Saved Click Settings While the CLICK screen is shown on the display, use the [–][+] controllers to select a user click.
Basic Guide Recording Your Performance Recording Your Performance Use the DTX-PRO to record your performance. When a USB flash drive is connected to the DTX-PRO, audio is recorded to the USB flash drive. You can overdub your performance onto an accompaniment song (input via the AUX IN jack) and save your performance combined with the accompaniment song as a single audio file. Recording to the DTX-PRO (when no USB flash drive is connected to the terminal) 1. Press the [RECORDER] button.
Basic Guide Recording Your Performance Recording to a USB Flash Drive 1. Connect a USB flash drive to the [USB TO DEVICE] terminal on the rear panel. When a USB flash drive is connected • You can record up to 90 minutes at a time. • A new file is created every time you record. • Simultaneous playback and recording to overdub your performance onto the currently playing song. 2. Press the [RECORDER] button. The RECORDER (USB) screen appears. The [RECORDER] button flashes while recording.
Basic Guide Recording Your Performance Overdub Recording Your Performance onto an Accompaniment Song You can also overdub your performance onto an accompaniment song that you’ve imported onto a USB flash drive and save your performance combined with the accompaniment song as a single audio file. Preparing an Accompaniment Song (Audio File) • Importing from a Computer Save the audio file (.wav file) from the computer to the root directory on a USB flash drive. Audio file requirements: 16-bit, 44.
Basic Guide Practicing with the Training Feature Practicing with the Training Feature Training is a feature you can use for effectively mastering various drumming skills. There are ten training types available on the DTX-PRO. You can use the internal training songs and click for the practice. Training Types Learning to Play Various Songs 1. TRAINING SONG Play along with various music categories and phrases. 2. PART MUTE Practice phrases with one instrument or one part at a time. 3.
Basic Guide Practicing with the Training Feature Starting and Ending Your Training 1. Press the [TRAINING] button. The TRAINING screen appears. 2. Use the [–][+] controllers to select a training type. For more information on the training types, see “Training Types” (page 45). For other settings, such as training song selection, the duration of the training (timer setting) or the difficulty level, press the button below “SETTING” ([F3]). For more information, refer to the Reference Manual (PDF). 3.
Basic Guide Practicing with the Training Feature 5. To end the training, press the button below “STOP” ([F1]) SONG SCORE GATE and FAST BLAST stop automatically. The results or the grades of your training appears after the exercise. An example of the training result (for 5. RHYTHM GATE): To restart the training, press the button below “RETRY” ([F1]), and to end the training, press the button below “OK” ([F3]). • Training results are not shown at the end of TRAINING SONG and PART MUTE.
Basic Guide Details on Training Types Details on Training Types The following ten training types are available on the DTX-PRO. 1. TRAINING SONG You can play along various music categories and phrases. What you can do during training: 1. 2. Use the [–][+] controllers to select a training song. or Play the drums along with the training song. Drum Mute Mute the drum part of the training song. Press the button to turn the setting on or off.
Basic Guide Details on Training Types 2. PART MUTE Part Mute is an exercise which you can mute any or all of the drum parts (such as snare and kick) and the backing parts (non-drum parts) from a training song. Part Mute can be useful in many ways—for example, for practicing only the snare part of the training song, or for tightening up your rhythm section skills by practicing only with a bass guitar sound. Keep in mind that this exercise is not scored.
Basic Guide Details on Training Types 3. SONG PART GATE Song Part Gate is a practical exercise for practicing one part or one section of the training song at a time. You can select a part for working intensively on a specific phrase or to work on independent hand/foot coordination, for example, in order to learn the essential part of the training song. Practice your drumming skills with other training exercises before trying Song Part Gate.
Basic Guide Details on Training Types 4. SONG SCORE GATE Song Score Gate is a final exercise for playing through all parts or sections of an entire training song. We recommend that you first master Song Part Gate (page 50) before working on Song Score Gate. The score (PDF) is available at the Yamaha website: https://download.yamaha.com/ After accessing the Support website (and clicking on “Manual Library”), enter the appropriate model name.
Basic Guide Details on Training Types 5. RHYTHM GATE 6. RHYTHM GATE TRIPLET Rhythm Gate is an exercise for striking pads along with the click at proper timing. Rhythm Gate is an exercise for practicing with sixteenth notes, while Rhythm Gate Triplets is for triplet notes. When you strike too early or too late, no sound is produced. What you can do during training: Difficulty level (gate width); determines the time range within which sound is produced.
Basic Guide Details on Training Types 7. DYNAMIC GATE Dynamic Gate is an exercise for playing pads with proper dynamics. Your aim is to control three levels: Weak, Normal and Strong. When you strike with the wrong dynamics, it will not produce any sound. How accurately you strike with the proper dynamics is evaluated at the end of the exercise. Once you master Dynamic Gate, you will be a skillful drummer at controlling dynamics depending on the situation.
Basic Guide Details on Training Types 8. MEASURE BREAK Measure Break is an exercise for keeping a steady tempo without the metronome. How accurately you strike the first beat of the measure after the break is evaluated. Once you master Measure Break, you can keep a steady tempo even after breaks or fill ins.
Basic Guide Details on Training Types 9. CHANGE UP Change Up is an exercise for playing seven different rhythms that change every two measures. How well you maintain good timing along with the rhythms is evaluated. Try your best to keep a steady tempo—even when the rhythms change. *: The seven practice rhythm patterns: What you can do during training: Current Rhythm Rhythm Mute Mute the rhythm guidance. Press the button to turn the setting on or off.
Basic Guide Details on Training Types 10. FAST BLAST Fast Blast is an exercise for building up the stamina needed for drumming. Strike the pads as many times as possible within a time limit. Timer (min: sec) Best score (times) Strike the pads as many times as possible within the time limit. The timer starts counting when you start striking the pads. Remaining time Counter The result appears on the screen.
Application Guide Connecting Separately Sold Add-ons and External Devices You can connect add-ons (sold separately) and external devices to the DTX-PRO to access more functions of the DTX-PRO. About the Trigger Input Jacks Trigger Input jacks are used for connecting pads. The [qSNARE] to [!4] jacks on the rear panel accept up to 14 pads. For more information on the types of pads you can use, see “Playing the Pads” (page 24).
Application Guide Connecting Separately Sold Add-ons and External Devices Integrating Separately Sold Accessories You can expand your electronic drum kit with various accessories* for an even more enjoyable drumming experience. (*: sold separately) The following describes how to connect a XP125SD-M or a RHH135. For the information on the compatibility of other pads, refer to the Pad Module compatibility table (PDF). https://download.yamaha.
Application Guide Connecting Separately Sold Add-ons and External Devices Integrating Electronic & Acoustic Drums The following describes a couple of examples of how you can integrate electronic and acoustic drums. Adding Pads to an Acoustic Drum Set Playing the DTX-PRO Using Acoustic Drums By attaching a CSAT924A Cymbal Stand Attachment and a drum holder to the cymbal stand from an acoustic drum kit, you can easily add a pad such as the XP80, XP70, and TP70 to that kit.
Application Guide Connecting Separately Sold Add-ons and External Devices Using Smart Devices Connecting a smart device to the [USB TO HOST] jack establishes a digital connection and allows you to: • Record and play back high-quality audio using apps • Practice, record (both audio and video), and share your recordings on social networks using Rec’n’Share NOTICE • Before connecting devices, make sure the volume levels on all external devices are set at their minimum.
Application Guide Connecting Separately Sold Add-ons and External Devices Connecting a Computer You can connect the DTX-PRO to a computer and use DAW (Digital Audio Workstation) software such as the included Cubase AI to record your performance, edit, or mix audio. For more information on how to connect a computer, refer to the Reference Manual (PDF). For more information on how to use the DAW software, refer to the Owner’s Manual for your DAW software.
Reference Message List Message 62 Description Are you sure? Confirms whether or not you want to run the specified operation. Auto power off disabled. Appears when the [–] button is held down while turning on the power informing the user that the Auto Power Off function is disabled. Backup error. Appears when writing data to the DTX-PRO has failed. If data was not be properly saved when turning off the unit, this message appears the next time the power is turned on.
Reference Message List Message Description Recording time limit exceeded. Appears when the recorder has reached the time limit. Recording time is about 1 minute 30 seconds with internal memory, and about 90 minutes with a USB flash drive. This message also appears when the USB flash drive has reached its capacity during recording. Read only file. Appears when a read-only file is selected during a file operation. Sample is too long. Sample is too long and cannot be loaded. Sample is too short.
Reference Troubleshooting Troubleshooting For more troubleshooting tips, refer to the Reference Manual (PDF). See page 7 for details on downloading this manual. Symptom No sound No sound Out of balance Possible cause • Ensure that the DTX-PRO is properly connected to headphones or an external audio system, such as an amplifier and/ or speakers. • Ensure that the cables you are using are in good condition.
Reference Troubleshooting Symptom Having difficulties during perfomance Sound is produced without striking the pad Reference page Solution For more information, refer to the “Reference Manual” (PDF). Sound is produced by a pad that was not struck (Crosstalk is occurring) Cannot choke Cannot mute Foot closed hi-hat sounds cannot be played It is difficult to produce closed hi-hat sounds Settings Possible cause Check the orientation of the cymbal pad.
Reference Specifications Specifications Tone generator Type AWM2 Maximum polyphony 256 notes Effect units For each Inst EQ / Comp / Transient / Insertion (*1) For each Kit Ambience / Effect 1 / Effect 2 Master Comp / Master Effect For overall Master EQ / Phones EQ (*1) Insertion effects can be used only for specific Inst.
Reference Index Index Symbols E P [–][+] controllers............................... 10 Edge shots ................................ 26, 27 Pads ................................................ 24 [–][+] knob ....................................... 10 [EFFECT] knob ......................... 10, 30 Position sensing .................. 24, 25, 27 [–] button ......................................... 10 Effects ....................................... 23, 32 [+] button ..................................
Drums Limited Warranty LIMITED WARRANTY ON YAMAHA DRUMS, HARDWARE AND ACCESSORY PRODUCTS Thank you for selecting a YAMAHA product. YAMAHA products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America (“YAMAHA”) is proud of the experience and craftsmanship that goes into each and every YAMAHA product.
DTX-PRO Owner’s Manual 69
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario M1S 3R1, Canada Tel: +1-416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A.
MEMO
MEMO
MEMO
MEMO
MEMO
Manual Development Group © 2020 Yamaha Corporation Published 03/2021 POMA*.
